This time I test printed at 1/6 scale and all keys fit correctly, maybe for 1/4 it could be a little loose but nothing that can be glued in place. Also the base will fit a small resin 3d printer, at least at 1/6 scale. As usual if printing in FDM I strongly recommend going for the 1/4 scale in order to do so scale each part to 150%.

*This time I added a the pre supported files I used to print, maybe it helps you to save some time ^^' *

Thank you again for your support, hope you liked and see you in future projects.Next project is Yuiffie from FFVII (http://fundrazr.com/yumekui09) but there is a chance I will do a quick model between; Diane from nanatsu no taizai (seven deadly sins) it will cost around 15$ so let me know if you are interested in that one ;) The model has the same origin point so if you need to assemble digitally to check where the pieces fit I recommend using windows 3d builder and import all pieces at one. Files could and will show issues in meshmixer and such, repairs are up to you if you need it, files are printable as they are, or you can simply repair them in 3d builder, I don't cause it makes the files to lost origin point. As always if some critical problem is found let me know and I will fix it.

Follow my FB page to stay tuned about future models and see my calendar of work and releases ^^ https://www.facebook.com/yumekui3d

-Single mesh included. -model coordinates snap togeter in this model when imported.

The model will surely show errors and holes if checked in meshmixer or the like softwares, you are free to fix it if you want, is up to you, but is not necessary for printing, I tested the print by opening the files in chitubox, hollow, add holes and supports with no problem. Cura and Simplidy3D had no problems as well. But still if any critical error or unprintable file is found let me know and I check and fix if necesary.