hello kaws 3D print model

3D model description

A 3D model inspired by the union of 2 very well-known and beloved characters in the world of collectibles, Kaws Companion and Hello Kitty, this is Hello Kaws!3D printing settings

Slicer Software: CHITUBOX V1.9.3

Layer Height: 0,05 mmBottom Layer Count: 8Exposure Time: 2,5 sBottom Exposure Time: 80 sTransition Layer Count: 5Transition Type: LinearWaiting Mode During Printing: Resting TimeRest Time Before Lift: 0 sRest Time After Lift: 0 sRest Time After Retract: 0,5 s

////////////////////////////////////////////

Slicer: Ultimaker Cura 5.1.0

Quality:layer height = 0.15 mm

Infill:density = 20 %pattern = lighting

Material:temperature = 210 ºCplate = 50 ºC

Speed:print speed = 50 mm/s

Support:structure = treeplacement = touching build plate

Build plate adhesion:type = raft