Accurate depiction of the Haunted Mansion Grandfather Clock, Disneyland, Anaheim Version. The clock face is the accurate version seen at the Haunted Mansion in Anaheim - with the correct center graphic/pattern. The Clock is 18.25 inches, 48cm tall.The Anaheim Version Clock has a few special features - the hour-hand is depicting a leech and the minute-hand is depicting a devil’s tongue, when they are set to a certain setting the combined hands show somewhat of a bat’s silhouette, for this, the minute-hand (Devil’s Tongue) needs to be rotated to the 7 mark. The bottom of the pendulum looks like a devil’s tail but is actually a Devil’s Face. There are 2 sets of files 1 Set for the Display Model and one set for the functioning, mechanical model. Each Set contains non supported STLs and supported STLs. 10 Parts for the Display Model and 26 Parts for the Mechanical Model. The model parts are sized to fit into a medium size machine.The face can be painted with glow paint, to create a green glow effect in the dark. IMPORTANT: For the mechanical Model it is very important to sand all the support contact-points on all contact surfaces (Gears, Connecting Elements and Axles) smooth and clean. Before glueing anything into place make sure all elements move smoothly, without hang-ups. The Hammer is emulating a ticking sound and does not have to be installed if not wanted. If the hammer is installed the crank can only be turned counter clock-wise (which is the actual rotation direction), it will lock up when turning clock-wise, If the hammer is not installed the crank can be turned either direction.