Highly realistic model of a legendary Gemini astronaut for 3D printing.
Now added, an uncut figure.
(Especially suitable for resin printing).
Data format: STL
Base scale: 1/6
The oxygen tube trick:
This works best if the whole figure is not too heavy.
Glue a solid metal wire stably in the intended hole and bend it around. (See picture)
Then attach the short dummy part and retouch the transition.
(These parts are not included in the 3D kit)
Please note!
Any printing results are up to the skill and equipment of the buyer.
No correspondence can be made on issues of customization of the scale and its printability.
The price of this high quality models is not negotiable.
C U S T O M - S C A L I N G
Here is a step by step way to scale the models to the dimensions of your project.
1. Copy all models into one document and save it.
2. Most of my 3D models have an initial scale of 1/6. Therefore scale up the whole content of this document with the factor 6.0 to the scale 1/1.
3. Then scale the whole content from 1/1 to your estimated scale
Without guarantee - here is a helpful list of scaling factors for the most common scales:
1/1: factor 1 (initial factor)
1/2: factor 0.5
1/3: factor 0.333
1/4: factor 0.25
1/5: factor 0.2
1/6: factor 0.167
1/7: factor 0.143
1/8: factor 0.125
1/9: factor 0.111
1/10: factor 0.1
1/12: factor 0.083
1/16: factor 0.062
1/18: factor 0.056
1/20: factor 0.05
1/22.5: factor 0.044
1/24: factor 0.042
1/25: factor 0.04
1/30: factor 0.033
1/32: factor 0.031
1/35: factor 0.029
1/45: factor 0.022
1/48: factor 0.021
1/50: factor 0.02
1/55: factor 0.018
1/72: factor 0.014
1/87: factor 0.011
1/110: factor 0.099
1/125: factor 0.008
1/144: factor 0.007