This is a model that has taken a lot of time out of my last year, I hope you like it.In this diorama you can see the EVA unit 01 in attack pose with a destroyed city around it, it is very detailed in each of the pieces that make up this diorama, the damage received in the Eva unit 01, the buildings of the destroyed city.

PRINT GUIDE

1. RESIN OR FDM?This model is created with resin printing in mind. It shouldn’t be too difficult to print with FDM, as shapes are generally geometric. However, building debris may be troublesome.
2. HOLLOW OR SOLID?Buildings are pre-hollowed, meaning most buildings only have perimeter walls and no floors. Unit-01 files are solids; however, I suggest hollowing them to make printing easier.
3. SIZEModel scale 1:250 (approximately)395W x 360D x 451.5H in mm
4. BASEI made the base with foam/foam core. The base geometry is fairly simple and should be easy to create. Add some broken up foam/sand mixture for a more organic result.Use the ‘base_guide’ drawing for cutting references. I do not recommend printing the base, as it is material intensive and relatively large. A fi le is provided if you wish to print it.
5. DETAILSPoles and traffic sign posts are included. You can print as many as you like and place them anywhere on the model. Cut or bend them to create interesting debris. Add wires/threads to create power lines. Models for cars are not included as I have not sculpted them myself. There are many fantastic free car assets available around the web.