Echo Windwalker Statue from Tech Demo

Echo Windwalker Statue from Tech Demo 3D print model

THIS IS NOT A PHYSICAL PRODUCT. You will get a download link upon purchase.

File format: STL

Level of detail: High (face/hair), Medium (body)

Total file size (compressed package): 418 MB

These files are hardware demanding, the HQ head alone is 100MB . Merged parts are somewhat lower quality for a normal computer to be able to handle it; if you're doing a large scale print, the loose parts are higher quality.

DISCLAIMER My prints are virtually tested in Cura with 0.10 mm layer height. Always have thicker walls than the standard setting to have some room for sanding & avoid fragile surfaces. Note that most of my models are non-modular; it means they're cheaper but require some additional work to glue the parts and cover seams with clay unless you print the entire full model. Other slicers than Cura have not been tested. There are a hundred different parameters that effect the outcome of a 3D print. This is the nature of 3D printing and I offer no support for the actual printing process. It's a difficult art to master, I've been printing for many years and it's still difficult to get good prints. Having to adjust angles of the model & sanding the print itself is a normal part of the process while making a statue like this.

Item rating
0 0
Echo Windwalker Statue from Tech Demo
Editorial License 
Echo Windwalker Statue from Tech Demo
Editorial License 
Response - % in - h

3D Model formats

Format limitations
  • Stereolithography (.stl)418 MB

3D Model details

  • Publish date2021-10-10
  • Model ID#3317236