Dark Magician Girl - Yugioh for 3D printing

Dark Magician Girl - Yugioh for 3D printing 3D print model

Dark Magician Girl for 3D print from Yugioh series

Model is 3D printable, tested and keyed. It is at 1/6 scale and is not particularly oriented, is up to you, but try to avoid printing flat to the keys and fitting holes since overcuring could cause keys to not fit properly or leave big gaps, also little sanding of the keys is recommended. Also try to fit the parts before gluing them, the skirt needs to be glued to the underwear part and this to the torso before the legs, But an already merged version is included in case you want it simple. So check all the files before printing and glueing.

Single mesh included. *Coordinates don't snap togeter in this model when imported togeter, if this is important to you **DO NOT PURCHASE. *The model will surely show errors and holes if checked in meshmixer or the like softwares, you are free to fix it if you want, is up to you, but is not necessary for printing, I tested the print by opening the files in chitubox, hollow, add holes and supports with no problem. Cura and Simplidy3D had no problems as well. But still if any critical error or unprintable file is found let me know and I check and fix if necesary.**

Toku-WebPage
Toku-WebPage
La verdad me encanto el modelo, esta excelente. Espero que un futuro diseñe un modelo de la figura de Angewomon. Saludos
Item rating
3 0
Recommended
La verdad me encanto el modelo, esta excelente. Espero que un futuro diseñe un modelo de la figura de Angewomon. Saludos!
Recommended
Great design... for DLP Printing there is a problem in the head area... there is too much "unconnected" geometry .... Prints need very tricky supports in the neck otherwise the head and hat are failing.... :(..... deserved me 3 failed prints with plenty waist of resin... to provide a zip file containing all parts would save a lot of download efforts
Recommended
Dark Magician Girl - Yugioh for 3D printing
$18.00
 
Editorial License 
Dark Magician Girl - Yugioh for 3D printing
$18.00
 
Editorial License 
Response 64% in 4.9h

3D Model formats

Format limitations
  • Stereolithography (.stl) (36 files)945 MB

3D Model details

  • Publish date2021-03-02
  • Model ID#2903075
Help