model optimized for 3D printing

Goofy is a classic Disney character, tall and lanky, with a big heart and a kind spirit, known for his clumsy yet endearing personality. Always optimistic and friendly, he often gets into comical situations due to his lack of coordination and naive way of seeing the world, but at the same time he demonstrates loyalty and courage when his friends need him. With his characteristic funny voice, his green hat, and his unmistakable laugh, Goofy has become one of the most beloved and recognizable characters in the Mickey Mouse universe.

FDM Printers (Filament)

Layer Height: 0.12–0.28 mm (0.2 mm is standard; lower for more detailed parts).

Nozzle Temperature: 190–220°C for PLA (adjust according to material: ABS 230–250°C, PETG 220–245°C).

Hot Bed Temperature: 50–70°C (PLA: 55–60°C; ABS: 90–110°C; PETG: 70–80°C).

Print Speed: 40–70 mm/s (slower for detailed parts).

Retraction: 4–6 mm at 25–45 mm/s (depending on the extruder).

Layer Fan: 100% for PLA; low or off for ABS.

Bed Adhesion: Brim or raft if the part has a shallow base.

Resin Printers (SLA/DLP/MSLA)

Layer Height: 0.025–0.05 mm (0.05 mm standard; 0.025 mm for high detail).

Normal Exposure Time: 2–3.5 seconds per layer (varies depending on resin and UV screen power).

Bottom Layer Exposure Time: 25–40 seconds.

Number of Base Layers: 4–8.

Lift Speed: 40–80 mm/min (slower speed reduces errors).

Lift Height: 5–8 mm.

Recommended Ambient Temperature: 20–25°C.

Post-processing: Wash in isopropyl alcohol (IPA or substitute) and UV cure 3–5 minutes per side.