Akuma Bust 3D Model STL Printable 3D print model

A fierce bust of Akuma from Street Fighter, capturing his menacing stare, spiky hair, prayer beads, and muscular shoulders. The design emphasizes his demonic aura—details like the “天” (Ten) kanji on his back, snarling expression, and flowing gi folds are sculpted for dramatic lighting and shadow. Watertight mesh, high detail, ready for both display and cosplay use.

Printing Details:

Printer Type: FDM or Resin

Layer Height: 0.1‑0.2 mm for FDM; 0.05‑0.1 mm for resin

Infill: 20‑30% (gyroid or cubic infill works good)

Walls / Shells: 2‑3 perimeters/shells; reinforce horns, beads, etc.

Supports: Needed under jaw, hair spikes, edges of gi, underside of bust base

Material: PLA or PETG for FDM; standard or high‑detail resin for resin printing

Build Plate Adhesion: Use brim or raft if base is small relative to bust height

Optional Hollowing & Drain Holes: Hollow inside with ~2‑3 mm wall + drain holes if large or resin to save weight and material

Post‑Processing: Clean up support marks, sand / prime; paint to bring out kontrasts like skin, cloth, beads; resin prints require washing & curing