12 inch 32 cm tall Matterhorn Ride Model highly detailed 3D print model

12 inch tall Matterhorn Model from the Disneyland Bobsled Ride. This is a museum quality Model at 12 inches in height, track layout from the 60s, including the Snowman (yeti) and bobsled, everything is built to scale. The track is raised off the ground like the actual ride. It features it's 3 iconic Waterfalls.
Due to its size there is no file with supports as this needs either a specific size machine or the model needs to be cut to manageable parts for smaller machines, which is doable in Chitubox and similar programs. The model is hollow with a 2mm thick wall - reducing the size will result in a thinner wall, please keep that in mind.
For snow application use Basic Mod-Podge type glue, mixed with Woodland Scenic Soft Flake Snow SN 140. Add enough snow-powder so you have thick paste that does not flow. Use the handle of a brush or an old brush to apply the snow paste to the wanted areas. Watch the Assembly video for accurate placement of the Yeti figure and the other parts.

Best results with SLA type systems - an FDM machine might produce an acceptable result due to the size of the model, however the track's thickness is to scale and might fail on an FDM machine. The Yeti and bobsled won't work using an FDM System due to the size and detail - an SLA type machine should be used. The Waterfalls are 3 separate models, which should be made using clear or translucent materials in order to simulate water (see images and videos).