Your friendly neighborhood superhero is here in an ultra-cute, stylized chibi form! This Spider-Man Chibi collectible features iconic web suit details, expressive oversized eyes, and a bold, iconic stance that makes it an absolute must-have for comic and Marvel fans.

This model is masterfully engineered as a Multi-Part Assembly, allowing you to achieve a vibrant, multi-colored result on any standard single-extruder 3D printer without requiring a multi-material system (like AMS or MMU).

• No AMS Required: Designed to be printed in separate color-coded plates/parts (as shown in the build plate layouts). Simply print the Black, Blue, White, and Red parts in their corresponding filaments and assemble.
• Smart Assembly & Keying: Features precise alignment pins and slots so each part (Head, Suit, Lenses, Eyes, Boots, and Chest Emblem) snaps together easily and accurately.
• Clean Surface Finish: Splitting the model into separate parts minimizes support marks and maximizes outer shell smoothness across all suit textures.
• File Formats Included: Standard STL files and fully configured 3MF print files.

• Pre-Configured 3MF Files Included: The provided 3MF files contain the exact plate arrangements, part orientations, and tested print settings used to manufacture the physical model shown in the images.
• Layer Height: 0.12mm to 0.16mm recommended for maximum detail on the webbing lines and chest emblem.
• Infill: 10% - 15% (Gyroid or Grid pattern).
• Wall Loops: 3 Walls recommended for strong outer walls and clean key/pin tolerances.
• Assembly: Test-fit all parts before applying glue. Once aligned, permanently bond the parts (Head, Torso, Arms, Boots, Lenses, and Emblems) using a few drops of super glue (Cyanoacrylate).