C
cooper-a-lang 2022-09-17 21:00:12 UTCcooper-a-lang
SO i have a question. The hole of part 2 and the screw on part 1 dont fit and im trying to figure out what to do. Got any advice?
Useto navigate. Pressescto quit
Wolf s Gravestone Genshin Impact 3D print model
Description
Digital model for 3D printing of the sword Wolf´s Gravestone.
Model optimized for big scale printing; unique piece model for standard 200x200x200mm print also available.
Model divided to fit standard printing volume (200x200x200mm). The sword is 1.3 meters long when assembled.
The model is prepared for an easy assembly, with screws and threaded holes in each of the pieces. There are up to 16 parts. Full model is also provided for those who have a printer which can print any volume. Assembly method is illustrated in one of the youtube previews.
Available for any requests. Any problems found you can contact me.
Search in my profile to find more models I have developed.
ZenkaiCad
Let me check it, excuse me for the delay answering back.
ZenkaiCad
I have checked it and found out the two pieces perfectly fit (aparently) in the stl files.
Don´t know why you have found that problem, what I would do is cut the screw in part one and just stick the two pieces, I think it would remain tightly joined as part 1 is not very big in this case.
Other option could be to join the two parts in one in your impression prepare software (cura or other) and print that new part with an inclination angle so that your printer has room enought to print it.
Hope that helps you! If that doesn´t fix the problem contact me and i can remodel than union with any specification you need.
M
marks-elarts marks-elarts
Model is very good, very detailed and thought out!
Will add more to the review when I finish printing!
Similar Models
to Wolf s Gravestone Genshin Impact
