*120 Grunge + Roughness Imperfection *
_
ERROSIONA | DUSTY | DAMAGED SURFACE
_**
49 PNG Grunge Textures71 PNG Roughness Textures
**
Surface roughness, often shortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose.
Roughness plays an important role in determining how a real object will interact with its environment. In tribology, rough surfaces usually wear more quickly and have higher friction coefficients than smooth surfaces. Roughness is often a good predictor of the performance of a mechanical component, since irregularities on the surface may form nucleation sites for cracks or corrosion. On the other hand, roughness may promote adhesion. Generally speaking, rather than scale specific descriptors, cross-scale descriptors such as surface fractality provide more meaningful predictions of mechanical interactions at surfaces including contact stiffness[1] and static friction.[2]
- Although a high roughness value is often undesirable, it can be difficult and expensive to control in manufacturing. For example, it is difficult and expensive to control surface roughness of fused deposition modelling (FDM) manufactured parts.[3] Decreasing the roughness of a surface usually increases its manufacturing cost. This often results in a trade-off between the manufacturing cost of a component and its performance in application.
Roughness can be measured by manual comparison against a surface roughness comparator (a sample of known surface roughness), but more generally a surface profile measurement is made with a profilometer. These can be of the contact variety (typically a diamond stylus) or optical (e.g.: a white light interferometer or laser scanning confocal microscope).
However, controlled roughness can often be desirable. For example, a gloss surface can be too shiny to the eye and too slippery to the finger (a touchpad is a good example) so a controlled roughness is required. This is a case where both amplitude and frequency are very important.
50 Roughness Imperfection-VOL 02 ---- https://www.artstation.com/a/6707299
100 Wood Stencil Imperfection-VOL 01---- https://www.artstation.com/a/6524961
20 Wood Smart Materials & 4k PBR Texture-Vol 1--- https://www.artstation.com/a/5730113
25 Metal Smart Materials & 4k PBR Texture-Vol 1---- https://www.artstation.com/a/5906066
20Leather Smart Materials & 4k PBR Texture---- https://www.artstation.com/a/3031817
And other Products: https://www.artstation.com/amirla62/store
