DESCRIPTION

3.7 cm Flak 37 Anti Aircraft Gun Lowpoly 3D model

Rar file contain Blendfile, Texture folder , FBX , Obj mtl

Centered (in right place) and Seperated parts

Blender 2.93.0

Textured with substance painter

1 Set of material and Texture

4 Types of Camouflages:

  • Grey camouflage

  • Desert camouflage

  • Winter camouflage

2k textures

Pictures rendered in Eevee engine

Vertices:19754

Faces:19646

Tris:35963

Description:The 3.7 cm Flak 18/36/37 was a series of anti-aircraft guns produced by Nazi Germany that saw widespread service in the Second World War. The cannon was fully automatic and effective against aircraft flying at altitudes up to 4,200 m. The cannon was produced in both towed and self-propelled versions. Having a flexible doctrine, the Germans used their anti-aircraft pieces in ground support roles as well; 37 mm caliber guns were no exception to that. With Germany's defeat, production ceased and, overall, 37 mm caliber anti-aircraft cannon fell into gradual disuse, being replaced by the Bofors 40 mm gun and later, by 35-mm anti-aircraft pieces produced in Switzerland. The original 37 mm gun was developed by Rheinmetall in 1935 as the 3.7 cm Flak 18. The cannon had an overall length of 89 calibers (hence the additional designation L/89), which allowed 4,800 m (15,700 ft) maximum ceiling. The armour penetration was considerable when using dedicated[5] ammunition, at 100 m distance it could penetrate 36 mm of a 60°-sloped armour, and at 800 m distance correspondingly 24 mm.[1] It used a mechanical bolt for automatic fire, featuring a practical rate of fire of about 80 rounds per minute (rpm). The gun, when emplaced for combat, weighed 1,750 kg (3,860 lb), and complete for transport, including the wheeled mount, 3,560 kg (7,850 lb).

The Flak 18 was only produced in small numbers, and production had already ended in 1936. Development continued, focusing on replacement of the existing cumbersome dual-axle mount with a lighter single-axle one, resulting in a 3.7 cm Flak 36 that cut the complete weight to 1,550 kg (3,420 lb) in combat and 2,400 kg (5,300 lb) in transport. The gun's ballistic characteristics were not changed, although the practical rate of fire was raised to 120 rpm (250 rpm theoretical). A new, simplified sighting system introduced the next year produced the otherwise-identical 3.7 cm Flak 37. The Flak 37 was known as 37 ITK 37 in Finland.

The Flak 36/37 were the most-produced variants of the weapon.

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
View all
3
0
2
sa
salvo-litricozzBuyer of this model
This user has purchased this specific model
Superb
valentin56610
valentin56610Buyer of this model
This user has purchased this specific model
Perfect perfect perfect!
kr
kruup86Buyer of this model
This user has purchased this specific model
The buyer left positive feedback on this model
anastasiia29910720
anastasiia29910720Community member
This user is part of the CGTrader community
good job!
BEST PRICE GUARANTEED
Found this model cheaper on another marketplace? Let our support team know - we’ll match it.

37 mm Flak 37 Anti Aircraft Gun Low-poly 3D model

Royalty Free License
Hire
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
Native file format
BLEND
Size: 66.2 MB
Renderer: Eevee | 2.93.0
Exchange formats
OBJ
OBJ<br />File Size: 66.2 MB
FBX
Autodesk FBX<br />File Size: 66.2 MB
PNG
PNG<br />File Size: 66.2 MB
Verified by CGTrader
Verified models are of higher quality as they have
passed CGT Standard technical and visual checks,
making them more professional-grade 3D assets.
Learn more.
FBX
This FBX file has successfully passed the CGT Standard technical and visual checks. The verification results are detailed in the section below.
File & scene
Binary FBX
Binary FBX file is more compact and faster to load and process.
Learn more
No unsupported objects
Unsupported objects:
- Lights
- Cameras
Learn more
Geometry
No N-gons
N-gons are polygons with five or more sides which might cause issues in certain processes like rendering or animation. Learn more
No faceted geometry
Faceted geometry uses flat surfaces without smoothing, which can look unrealistic on curves.
Learn more
Manifold geometry
Manifold geometry ensures all surfaces are properly connected, avoiding issues like edges shared by more than two faces.
Learn more
Textures & material
PBR textures
PBR textures simulate how light interacts with materials, making the model look realistic under different lighting.
Required PBR textures:
- Base Color
- Roughness
- Metalness
- Normal
Learn more
No embed textures
Embedded textures are stored inside the model file, increasing its size and sometimes causing compatibility issues.
Learn more
Square textures
Texture aspect ratio is the width-to-height ratio of a texture. Expected texture aspect ratio: 1:1
Learn more
Power of 2 texture sizes
Textures with dimensions in power of two (e.g. 512x512px, 1024x1024px) are used to optimize performance and memory usage.
Learn more
Assigned materials
Materials are applied to the 3D model to allow visualize a model's surface properties and appearance.
Learn more
UVs & naming
No UV overlaps
UVs overlap when multiple points on the 3D model's surface are mapped to the same point on the UV island causing texture stretching.
Learn more
UV unwrapped model
A UV unwrapped model means its 3D surface is flattened into 2D space, allowing textures to be applied accurately.
Learn more
Allowed characters
Allowed ASCII characters: a-zA-Z0-9-_
Learn more
Provided by designer
Information and details shared directly by the model's designer.
3D Features
The model includes animations (movement or actions) that can be played in supported software or engines.
The model has a skeleton or bone structure, making it ready for posing or animation.
PBR
Uses Physically Based Rendering materials, which give the model realistic lighting and surface properties.
Textures
The model includes image files (textures) that add color, patterns, or detail to its surfaces.
Materials
The model has material settings that define how surfaces look (color, shine, transparency, etc.).
UV Mapping
The model's surfaces are mapped to a 2D image, allowing textures to display correctly.
Plugins Used
Some external plugins were used to create the model. These may be required for full functionality.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is not 3D printable
The designer indicates this model is intended for digital use only (rendering, animation, or AR/VR) and not for 3D printing.
Geometry
Polygon mesh
A model built from polygons (triangles or quads) connected in a mesh.
19646 polygons
The total number of polygons (flat shapes) that make up the 3D model.
/ 19754 vertices
The number of points (corners) that define the shape of the model's polygons.
Unwrapped UVs
Publish date
Model ID
Chat