This 3D model was originally created with Sketchup 13 and then converted to all other 3D formats. Native format is .skp 3dsmax scene is 3ds Max 2016 version, rendered with Vray 3.00 Thank you so much AirbusA330 for helping me on out on this project! Model GEFS-compatiable! The Bombardier BD-100 Challenger 300 is a super-mid-sized jet capable of traversing transcontinental distances. It is not developmentally related to the similarly named Challenger 600-series, or the 600-derived Challenger 800-series. The project was launched at the Paris Air Show on July 13, 1999, at which time it was called the Bombardier Continental. It was a clean sheet design, assembled in Bombardier's Learjet plant at Wichita Mid-Continent airport, Kansas. The jet was renamed in September 2002 after much debate about which category {Learjet, Challenger, or Global} the new aircraft fit into. It entered commercial service in January 2004. Crew: Two (pilot %26 co-pilot)Capacity: Up to 16 passengers (normally 8)Length: 20.93 m (68 ft 8 in)Wingspan: 19.46 m (63 ft 10 in)Height: 6.2 m (20 ft 4 in)Wing area: 48.5 m2 (522 sq ft)Empty weight: 10,591 kg (23,349 lb)Max takeoff weight: 17,622 kg (38,850 lb)Powerplant: 2 × Honeywell HTF7000 turbofan engines, 30.36 kN (6,825 lbf) thrust eachMaximum speed: 891 km/h (554 mph; 481 kn)Maximum speed: Mach 0.83Cruising speed: 850 km/h (528 mph; 459 kn)Range: 5,741 km (3,567 mi; 3,100 nmi) at 0.78 MachService ceiling: 13,716 m (45,000 ft)Rate of climb: 25.4 m/s (5,000 ft/min) at 17,622 kg (38,850 lb) max gross weightWing loading: 359.5 kg/m2 (73.6 lb/sq ft)Avionics:Rockwell Collins Proline 21Info %26 Specs: WikipediaEDIT: Fixed size of the model. Modeling on an 11,000ft tall Challenger is kind of tricky sometimes xD