This 3D model was originally created with Sketchup 8 and then converted to all other 3D formats. Native format is .skp 3dsmax scene is 3ds Max 2016 version, rendered with Vray 3.00 The planes gear has jammed, and the plane started clipping the ground with wing 1. The gear jam problem was because the airline repair crew didnt check the plane for 2 months, resulting in the moss growing inside the mechanism. When the plane took off, the captain noticed a strange sound when he was getting the gear up. When the plane started climbing to 30,000 feet {flight from Sanaa to New York with a transition at Madrid}, the plane`s gear mechanism started producing strange sounds, until finally the gear fell unto the landing gear doors. The doors were bumped, mechanism fully unworkable, and fuselage heavily damaged. The front gear doors also became bumped and also damaged the fuselage. Pilots, passngers, and crew members noticed the following, and there was a serious gap in the floor of the interior. Electricity went off. They were landing according to the runway lights and PAPI system. The plane was approaching runway 36L. When the plane tilted to match the runway heading, the landing gear, damaged another part of the fuselage hitting the control ropes. Done. The plane is uncontrolable. When the passengers and crew began running to the opposite side of the plane, the landing gear tilted more. Then, the plane finally became controlable, but it was too late. The plane started hitting the ground with the wing, and the ailerons fixed on place to nose down. Then, the plane catched fire and exploded in 13.2 seconds.