Aluminum boat-tender for transportation of a wide range of cargoes with the possibility of loading and unloading from unequipped shore. The dimensions of the cargo platform of the boat are 6000-2100 mm. Are designed for the transportation of two ATVs, one swamp-carrier or even a small car. The load capacity of the boat varies from 1000 to 1300 kg. And depends on the dimensions of the cargo being transported and the distribution of the center of mass. The width of the nose ramp allows you to load with your own equipment or equipment up to a width of 1950 mm. As an option on the body, you can place a crane beam with a load capacity of up to 500 kg. The trench of the tender is designed for installation of two outboard boat motors, which significantly increases the maneuverability of the boat and reduces the overall draft of the vessel. The large thickness of the aluminum sheet at the bottom of the boat and the reinforcing keel pad allows you to boldly moor the tender to almost any shoreline. To ensure unsinkability, the aluminum hull of the boat is divided into 4 hermetic compartments, and additional buoyancy units are located above the waterline.