This original and functional 1/10 scale open tool box comes in 2 versions. Logo and non logo.

Both versions are essentially a 2 piece print regardless of which version. Includes the handle and the basket. The print becomes much easier when these 2 are separated as there are less printing supports needed, which will give you a higher success rate.

The assembly of the handle and basket is very simple, and all you need is 2-4 drops of super glue. The handles are designed to hold in place with a small amount of friction, then 1-2 drops of super glue can be used per side to secure the handle in place.

The toolbox can be scaled up or down to fit your own specifications, but do make sure to scale both the basket and handle at the same time and to the same scale, or else the handle’s diameter will end up too big or too small to fit.

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.To get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!