{"listingPage":true,"listingPagePreloaded":true,"params":{"locale":"en","controller":"listing_page","action":"index","parent_category_slug":"psu","file_types":null},"browser_attributes":{"title":"Free \u0026 Premium Psu print files","description":"Here you can find Psu 3D print files (STL, OBJ, FBX, and many others) ready for printing. Purchase and download free 3D models, stream and print with your 3D printer.","free_to_premium":{"prefix":"Do you need something special? You can find better quality","main":"psu 3D models","postfix":"in the premium listing."},"thumbnails":null,"bottomDescription":false,"pathName":"/3d-models","breadcrumbs":"\u003cdiv class=\"container\"\u003e\u003cul class=\"breadcrumb\" itemtype=\"https://schema.org/BreadcrumbList\" itemscope=\"itemscope\"\u003e\u003cli itemprop=\"itemListElement\" itemscope=\"itemscope\" itemtype=\"http://schema.org/ListItem\" class=\"breadcrumb__item\"\u003e\u003ca itemtype=\"http://schema.org/Thing\" itemprop=\"item\" itemscope=\"itemscope\" title=\"3D Models For Print\" id=\"94c7a1d83304da5f2be34258fca55af5\" href=\"https://www.cgtrader.com/3d-print-models\"\u003e\u003cspan itemprop=\"name\"\u003e3D Models For Print\u003c/span\u003e\u003c/a\u003e\u003cmeta itemprop=\"position\" content=\"1\" /\u003e\u003c/li\u003e\u003cli itemprop=\"itemListElement\" itemscope=\"itemscope\" itemtype=\"http://schema.org/ListItem\" class=\"breadcrumb__item\"\u003e\u003cspan itemtype=\"http://schema.org/Thing\" itemprop=\"item\" itemscope=\"itemscope\"\u003e\u003cspan itemprop=\"name\"\u003ePsu  3D print models\u003c/span\u003e\u003c/span\u003e\u003cmeta itemprop=\"position\" content=\"2\" /\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e","breadcrumbsType":"Browse by type","rootPath":"/3d-print-models/psu","validBrowserType":[{"tag":"Low-poly Psu","category_url":"/low-poly-3d-models/psu"},{"tag":"Rigged Psu","category_url":"/rigged-3d-models/psu"},{"tag":"Animated Psu","category_url":"/animated-3d-models/psu"},{"tag":"3D printed Psu","category_url":"/3d-print-models/psu"}],"relatedTagsUrlWithoutTag":"https://www.cgtrader.com/3d-print-models","currentProductType":"printable","searchingFree":false,"isTopBannerVisible":true},"tags":[["enclosure",{"thumbnailUrl":"https://media.cgtrader.com/variants/dLxAjG3Yp82SFg87xWoKqw2S/3f223245f7bf85c38047ea969bc08e306a91b3438ff89828ac73f8fa8aaede2e/white-picket-fence-3d-model-low-poly-obj-3ds-fbx-blend-mtl.jpeg"}],["gadgets",{"thumbnailUrl":"https://media.cgtrader.com/variants/wkRWziSXUB7UwY9FF2zJ3Dsk/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/hacker-gadget-3d-model-low-poly-max-obj-mtl-fbx-spp-tbscene-tbmat.jpg"}],["power",{"thumbnailUrl":"https://media.cgtrader.com/variants/GQ7w2ob8kQRkU1njK6FaXj8a/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/1.png"}],["supply",{"thumbnailUrl":"https://media.cgtrader.com/variants/C8RBdZGhVSD8LkpdGLcYkjB4/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/stationery.jpg"}],["cover",{"thumbnailUrl":"https://media.cgtrader.com/variants/gRaW9dFooNxR5EA9xqNkfq8X/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/fabric-set-v2-3d-model-low-poly-max-obj-mtl-3ds-fbx-c4d-tbscene-tbmat.jpg"}],["lighting",{"thumbnailUrl":"https://media.cgtrader.com/variants/v92H1qY7DYkfMCgszYgghyvU/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/lamp-01-am152-3d-model-obj.jpg"}],["mean",{"thumbnailUrl":"https://media.cgtrader.com/variants/dmvTnNunYxjdWhut5MGf87zV/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/logistics_00.jpg"}],["well",{"thumbnailUrl":"https://media.cgtrader.com/variants/kua4hS8UMbnkGk7KuExYo9WD/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/water-well-3d-model-low-poly-obj-3ds-mtl.jpg"}],["diy",{"thumbnailUrl":"https://media.cgtrader.com/variants/bvokyKVncuBk7zWDUUUqkvjr/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/inner.jpg"}],["hobby",{"thumbnailUrl":"https://media.cgtrader.com/variants/SWYwofSH5HqGUMXuEksXWdEY/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/000.jpg"}],["hobby-diy",{"thumbnailUrl":"https://media.cgtrader.com/variants/QpMzXvZHFYNZWCv9YdZPZiiv/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/A.jpg"}],["led",{"thumbnailUrl":"https://media.cgtrader.com/variants/ZnHMazy7NUbu9x9j9dLbauFy/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/preview1.jpg"}],["accessories",{"thumbnailUrl":"https://media.cgtrader.com/variants/JkVD6L6dXTTkYyibU8QR92qR/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/02.jpg"}],["case",{"thumbnailUrl":"https://media.cgtrader.com/variants/QKNbdDfTEKgwK5ijBkKuG99B/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/1.png"}],["electronics",{"thumbnailUrl":"https://media.cgtrader.com/variants/FsL2fgfZjkbyxY25pTYYKiSd/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/circuit-board-3d-model-animated-rigged-obj-mtl-c4d.jpg"}]],"seo_tags":[{"key":"Psu","tag":"psu","count":0,"show":true},{"key":"Electronics","tag":"electronics","count":70,"show":true},{"key":"Power","tag":"power","count":68,"show":true},{"key":"Supply","tag":"supply","count":63,"show":true},{"key":"Computer","tag":"computer","count":58,"show":true},{"key":"Pc","tag":"pc","count":56,"show":true},{"key":"Desktop","tag":"desktop","count":37,"show":true},{"key":"Electric","tag":"electric","count":36,"show":true}],"is_mobile_s_s_r":false,"data":[{"id":"4235906","type":"listingItem","attributes":{"id":4235906,"title":"Thrustmaster T818 PSU Mount","price":3.0,"description":"PSU Mount for Thrustmaster T8181 Racing DD Wheel Base - Great to mount your power supply on Alu Profile Extrusions (80x40)\n\nFits PSU model: A1801-24007000DI * please always check yours before placing the order. \n\nItem Features:\n\nGreat fit around the PSU - Sturdy and not too tight, so as not to leave marks/scratches\nVertical/Horizontal Mounting Option for Thrustmaster T818 PSU on Aluminium Profile Cockpits\n4x M8 Fitting Holes (2 Bolts are sturdy - 4 for extra sturdy)","imageAlt":"Thrustmaster T818 PSU Mount 3D print model","url":"https://www.cgtrader.com/3d-print-models/tools-organizers/holders/thrustmaster-t818-psu-mount","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Rt5MhtEECKdUdJFqBgxbWuEj/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_7684.jpg","gridUrl":"https://media.cgtrader.com/variants/Rt5MhtEECKdUdJFqBgxbWuEj/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_7684.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/tools-organizers/holders/thrustmaster-t818-psu-mount","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"tools-organizers","subcategorySlug":"holders","categoryTitle":"Tools \u0026 Organizers","subcategoryTitle":"Holders","schemaImageUrl":"https://img-new.cgtrader.com/items/4235906/a313cff86e/thrustmaster-t818-psu-mount-3d-model-a313cff86e.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7185229","type":"listingItem","attributes":{"id":7185229,"title":"Custom Mini-ITX PC Case for 3d Printing","price":15.0,"description":"Compact custom PC case designed for Mini-ITX motherboards with support for both SFX and ATX power supplies, offering flexibility when selecting components.\n\nFeatures\nCompatible with Mini-ITX motherboards.\nSupports both SFX and ATX power supplies.\nDedicated mounting system for a vertically installed graphics card.\nSupports one 2.5\" SSD via an integrated SSD bracket.\nIntegrated channel for LED strip installation.\nTop panel includes mounting points for three 60×60 mm fans.\nSide panels feature two ventilation cutouts for improved airflow and component cooling.\nImportant Information\n\nTo install a graphics card, a 300 mm (30 cm) PCIe riser cable is required and is not included with the model.\n\nPCIe Riser Installation\n\nFor proper installation, follow this sequence:\n\nSecure the graphics card mounting bracket and PCIe riser assembly.\nRoute the riser cable through the designated openings in the chassis.\nCarefully rotate the riser cable approximately 180°.\nConnect the riser to the motherboard PCIe slot.\n\nAvoid excessive force or sharp bends when positioning the riser cable.\n\nAdditional Hardware Required\n6 × M3 standoffs\n4 for motherboard installation\n2 for GPU riser mounting\n6 × M3 screws for securing the standoffs\nNotes\n\nThis listing includes the 3D model of the case only. Please verify hardware compatibility before manufacturing and assembly.\n\nIf you have any questions regarding assembly, compatibility, modifications, or customization options, feel free to contact me at any time. I will be happy to help.","imageAlt":null,"url":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/custom-mini-itx-pc-case-for-3d-printing","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/psepqhtm0lzcy9qzmjsrndfgp9x5/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_20260606_172242.jpg","gridUrl":"https://media.cgtrader.com/variants/psepqhtm0lzcy9qzmjsrndfgp9x5/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_20260606_172242.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/custom-mini-itx-pc-case-for-3d-printing","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":true},{"id":222,"name":".mp4","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"pc-laptop","categoryTitle":"Gadgets","subcategoryTitle":"PC \u0026 Laptop","schemaImageUrl":"https://img-new.cgtrader.com/items/7185229/10f4a1aba5/custom-mini-itx-pc-case-for-3d-printing-3d-model-10f4a1aba5.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"7117642","type":"listingItem","attributes":{"id":7117642,"title":"ITX computer SFF Case Sub 4L easy assembly","price":9.98,"description":"New Version!\n\nNow with a very strong handle, improved mesh geometry and improved rounder aesthetics.\n\nAssembly PDF:\nhttps://marcosponce.com/PDFs/Under4L_Assembly_Guide.pdf\n\nV1 was 4.7L and needed seven printed parts plus a pile of specialty hardware. It worked, but building it felt like its own side project. Every revision after that had the same goal: take something out without breaking anything.\n\nV6 is where it landed. 3.73 liters. Two parts. Four screws. Start the print before bed. It's ready in the morning.\n\nWhat you get\n\nTwo STL files, a skeleton and a shell. Print both, screw them together with 4x M3x6mm hex socket head cap screws, and you've got a working case. No heat-set inserts, no metal threaded inserts, no hunting down specialty hardware from three different sites.\n\nHardware compatibility\n\nVolume: 3.73L\n\nMax CPU cooler height: 37mm\nMax RAM height: 37mm\nPSU: any standard Flex ATX (170 x 82 x 41.2mm or smaller)\nMax GPU: 182 x 69 x 36-40mm (tested with a Gigabyte 5060 LP)\nGPU note: you'll need a 200mm PCIe riser cable\n\nVents on all sides except the front plate. Air comes in from the sides, exhausts through the top and back via the Flex ATX fan.\n\nPrint requirements\nAny FDM printer with a 256x256mm bed or larger. Tested on a Bambu P1S.\nPrint time runs about 12 hours at standard quality, or around 22 hours if you want finer layers and more walls.\nFor the skeleton, use ABS, ASA, or PETG. The exhaust hits 61.8°C under stress, so you need something with a glass transition above 60°C. PLA will warp over time.\nFor the shell, PLA works fine. Shell panels max out at 45°C. Print it in whatever filament looks good to you.\n\nThermals\nStress tested with a thermometer. Hottest exhaust point (top/back) hit 61.8°C. Shell panels peaked at 45°C. Both well within safe limits for the materials listed above.\n","imageAlt":"ITX computer SFF Case Sub 4L easy assembly","url":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/itx-computer-sff-case-sub-4l-easy-assembly","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8n3iql28e254nd836s3pzdrobu4w/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_6831.jpg","gridUrl":"https://media.cgtrader.com/variants/8n3iql28e254nd836s3pzdrobu4w/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_6831.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/itx-computer-sff-case-sub-4l-easy-assembly","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"pc-laptop","categoryTitle":"Gadgets","subcategoryTitle":"PC \u0026 Laptop","schemaImageUrl":"https://img-new.cgtrader.com/items/7117642/0aaa7803da/itx-computer-sff-case-sub-4l-easy-assembly-3d-model-0aaa7803da.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}},{"id":"6375058","type":"listingItem","attributes":{"id":6375058,"title":"Mean Well LRS-600 - 600N2 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure!**\n\nWhile designed around and tested with the Mean Well LRS-600-12, this enclosure will work with with any Mean Well 600 and 600N2 series power supplies such as the:\n\n- LRS-600-5\n- LRS-600-12\n- LRS-600-15\n- LRS-600-24\n- LRS-600-27\n- LRS-600-36\n- LRS-600-48\n\nand\n\n- LRS-600N2-12\n- LRS-600N2-24\n- LRS-600N2-36\n- LRS-600N2-48\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.86\" L x 4.88\" W x 1.60\" H (225.0mm x 124.0mm x 41.0mm).\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case. \n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 253mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course. \n\n**Additional Parts / Hardware Required:**\n\n*McMaster part numbers included where applicable.\n\n1x Power Cord - Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws\nPhillips Flat Head Screw, M4 x 0.7mm Thread, 6 Mm Long - 92010A216\n\n4x Surface Mounting Screws\n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long - 90190A113\n\n4x Magnet Inserts\nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od - 5862K122\n\n**Metric Equivalents:**\n\n4x Surface Mounting Screws\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\n-\tBottom Shell\n-\tTop Shell – Magnetic Retention (If you plan to add magnets to the top cover).\n-\tTop Shell – Press Fit (If you intend to rely on pin friction for hold).\n-\tFront Grommet\n-\tSplit Front Grommet - Bottom Half\n-\tSplit Front Grommet - Top Half\n\n**Recommended Print Settings:**\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees. Lastly, the corner pins are little long and can be a little fragile if layer adhesion is an issue. To minimize the risk of snapping, try gluing in a portion of 1/8in - 3mm rod, using a very self-adhering material, or just sticking to the shorter pinned \"press fit top cover.\"\n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly. \n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears. \n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general. \n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection","imageAlt":"Mean Well LRS-600 - 600N2 Series 3D printable model 2","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-600-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pyxy0cbw97pusl92qlujblawzrqb/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-%20Hero-600.jpg","gridUrl":"https://media.cgtrader.com/variants/pyxy0cbw97pusl92qlujblawzrqb/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-%20Hero-600.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-600-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6375058/32921054df/mean-well-lrs-600-600n2-series-power-supply-enclosure-3d-model-32921054df.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6357156","type":"listingItem","attributes":{"id":6357156,"title":"Mean Well LRS-350 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure!**\n\nWhile designed around and tested with the Mean Well LRS-350-24, this enclosure will work with with any Mean Well 350 series power supplies such as the: \n\n- LRS-350-3.3\n- LRS-350-4.2\n- LRS-350-5\n- LRS-350-12\n- LRS-350-15\n- LRS-350-24\n- LRS-350-36\n- LRS-350-48\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.46\" L x 4.53\" W x 1.18\" H (215.0mm x 115.0mm x 30.0mm) - the only exceptions being the passive / fanless 200 series PSU's which require a completely unobstructed top cover to allow proper ventilation. If you need a enclosure for one of those, check out our LRS-200 series enclosure.\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case.\n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 245mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course.\n\n**Additional Parts / Hardware Required:**\n\nMcMaster part numbers included where applicable.\n\n1x Power Cord:\n*Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws:\nPhillips Flat Head Screw, M4 x 0.7 Mm Thread, 6mm Long \n92010A216\n\n4x Surface Mounting Screws:\n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long \n90190A113\n\n4x Magnet Inserts:\nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od \n5862K122\n\nMetric Equivalents:\n\n4x Surface Mounting Screws:\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts:\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\nBottom Shell, \nTop Shell, \nFront Grommet, \nSplit Front Grommet - Bottom Half, \nSplit Front Grommet - Top Half\n\n**Printing Recommendations:**\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees.\n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly.\n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears.\n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general.\n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure Collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection","imageAlt":"Mean Well LRS-350 Series Power Supply 3D printable model","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-350-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pfncf5gxm0fkkdyeeu2xyybxjfay/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-%20Herob.jpg","gridUrl":"https://media.cgtrader.com/variants/pfncf5gxm0fkkdyeeu2xyybxjfay/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-%20Herob.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-350-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6357156/b5191aafa7/mean-well-lrs-350-series-power-supply-enclosure-3d-model-b5191aafa7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2425198","type":"listingItem","attributes":{"id":2425198,"title":"Prusa MK3S PSU Under Table Mount Holder","price":6.99,"description":"I was building a LACK Enclosure for my Prusa MK3S printer and read that the power supply unit (PSU) should ideally be kept outside the enclousre as the electronics inside should not be exposed to high temperatures for long term.\n\nUnfortunately, the mount that came with the design files from Prusa did not fit the black PSU shipped with my printer.\n\nI decided on this under table mount as I have a large box that stores filaments kept under the table and I want the flexibility to drag the box out from any direction.\n\nThis under table mount uses 2 square knobs to lock it in place when sloted into the bracket held by 2 screws under the table. The square hooks is screwed onto the PSU itself with the same 2 holes which was used to mount it on the original Prusa MK3S frame. \n\nThe switch and the power supply connector is faced conveniently outwards for easy access. My PSU is mounted on the left side of the table, but the same frame will work for front, left and rear mouting as well.\n\nDo take note that the orignal cables are a little short so my wires are currenlty routed under the left side of the acrylic sheet and not from the rear.\n\nDo note that the PSU mount is a little bit bigger that the build plate of the MK3S so I designed it in 2 seperate parts, you just need to use any superglue to stick the 2 pieces together.\n\nAlso check out my Frame Support with PSU Mount, which uses the same square hooks.\n\n**These are the settings I used for this print:**\n1. I recommned PETG for this print but PLA should work just fine.\n2. Layer height:  0.2mm \n3. Infill - 15%\n4. Supports - 7% (or less) auto generated support, just enough for the \"sockets\" to print out cleanly and for the hooks to print properly\n5. Z distance - 0.125 (for easier support removal)\n6. Other settings should be default\n\n","imageAlt":"Prusa MK3S PSU Under Table Mount Holder 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/prusa-mk3s-psu-under-table-mount-holder","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wZkTib8LVAMN5cqbDLR2DutV/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Prusa_PSU_Table_Mount.jpg","gridUrl":"https://media.cgtrader.com/variants/wZkTib8LVAMN5cqbDLR2DutV/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Prusa_PSU_Table_Mount.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/prusa-mk3s-psu-under-table-mount-holder","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2425198/647bbe86fa/prusa-mk3s-psu-under-table-mount-holder-3d-model-647bbe86fa.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6377878","type":"listingItem","attributes":{"id":6377878,"title":"Mean Well RSP-200 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure!**\n\nWhile designed around and tested with the Mean Well LRS-200-24, this enclosure should, by all accounts work with any of the RSP series power supply as they share the same exact dimensions and venting arrangement. This includes the: \n\n- RSP-200-2.5\n- RSP-200-3.3\n- RSP-200-4\n- RSP-200-5\n- RSP-200-7.5\n- RSP-200-12\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.46\" L x 4.53\" W x 1.18\" H (215.0mm x 115.0mm x 30.0mm) - the only exceptions being the 350 series PSU's which would benefit from a bit more material on top. If you need a enclosure for one of those, check out our RSP-320 series enclosure.\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case. \n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 245mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course. \n\n**Additional Parts / Hardware Required:**\n\n*McMaster part numbers included where applicable.\n\n1x Power Cord\n*Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws\nPhillips Flat Head Screw, M4 x 0.7 Mm Thread, 6mm Long \n92010A216\n\n4x Surface Mounting Screws\n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long \n90190A113\n\n4x Magnet Inserts\nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od \n5862K122\n\n\nMetric Equivalents:\n\n4x Surface Mounting Screws\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\nBottom Shell\nTop Shell\nFront Grommet\nSplit Front Grommet - Bottom Half\nSplit Front Grommet - Top Half\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees. \n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly. \n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears. \n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general. \n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection\n\nTHOUGHT UP, DRAWN, TESTED, AND VERIFIED BY HUMANS","imageAlt":"Mean Well RSP-200 Series Power Supply 3D print model 1","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-rsp-200-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wabyr7lhczheza1jb7yl2iplqgoj/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-Hero.jpg","gridUrl":"https://media.cgtrader.com/variants/wabyr7lhczheza1jb7yl2iplqgoj/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-Hero.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-rsp-200-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6377878/3b9a3171f0/mean-well-rsp-200-series-power-supply-enclosure-3d-model-3b9a3171f0.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6357108","type":"listingItem","attributes":{"id":6357108,"title":"Power Supply Enclosure Collection","price":80.0,"description":"**Consider this project a perpetual subscription to all of our Power Supply enclosures - buy once, get access to them all. As an added bonus, you can request enclosures for a power supply not yet in the collection, request cable retaining front plates, AND get a 30% discount off of our typical production price should you need one printed for you (all hardware included, just pay shipping).**\n\nIn the collection so far, we have enclosures for the:\n\nMean Well LRS-200 series:\n\n- LRS-200-3.3\n- LRS-200-4.2\n- LRS-200-5\n- LRS-200-12\n- LRS-200-15\n- LRS-200-24\n- LRS-200-36\n- LRS-200-48\n\nMean Well LRS-350 series:\n\n- LRS-350-3.3\n- LRS-350-4.2\n- LRS-350-5\n- LRS-350-12\n- LRS-350-15\n- LRS-350-24\n- LRS-350-36\n- LRS-350-48 \n\nMean Well LRS-450 series:\n\n- LRS-450-5\n- LRS-450-12\n- LRS-450-15\n- LRS-450-24\n- LRS-450-36\n- LRS-450-48 \n\nMean Well LRS-600 series:\n\n- LRS-600-5\n- LRS-600-12\n- LRS-600-15\n- LRS-600-24\n- LRS-600-27\n- LRS-600-36\n- LRS-600-48 \n\nMean Well LRS-600N2 series:\n\n- LRS-600-12\n- LRS-600-24\n- LRS-600-36\n- LRS-600-48 \n\nMean Well RSP-200 series:\n\n- RSP-200-2.5\n- RSP-200-3.3\n- RSP-200-4\n- RSP-200-5\n- RSP-200-7.5\n- RSP-200-12 \n\nMean Well RSP-320 series:\n\n- RSP-320-2.5\n- RSP-320-3.3\n- RSP-320-4\n- RSP-320-5\n- RSP-320-7.5\n- RSP-320-12 \n\nPotential follow up enclosures:\n\n- LRS-35\n- LRS-50\n- LRS-75\n- LRS-100\n- LRS-150\n- LRS-150F\n- LRS-1200\n- UHP Series \n\nPlease note that requests are currently limited to adaptations of our current design to AC-DC power supplies with a similar form factor, and that we are mainly focusing on Mean Well power supplies as they are one of the most reputable, tested, verified brands around. However, we will consider also making enclosures for power supplies by Phillips, Osram, or Cincon. No, we will not consider any off-brand drivers you find on Alibaba or Amazon.\n\nFor any designs that allow it, we will aim to make printable water and air-tight versions as well.\n\nPlease refer to the included README for enclosure-specific recommendations or go to the particular enclosure's listing - you can navigate to it quickly by clicking on our profile and finding the enclosure you're looking for.\n\nThought up, drawn, tested, and verified by humans.","imageAlt":"3D printable model Power Supply Enclosure Collection","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/power-supply-enclosure-collection","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wxmjhou23c3m7dnqpua0tbw62f97/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/power-supply-enclosure-collection-3d-model-19e262ac39.jpg","gridUrl":"https://media.cgtrader.com/variants/wxmjhou23c3m7dnqpua0tbw62f97/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/power-supply-enclosure-collection-3d-model-19e262ac39.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/power-supply-enclosure-collection","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6357108/19e262ac39/power-supply-enclosure-collection-3d-model-19e262ac39.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6357143","type":"listingItem","attributes":{"id":6357143,"title":"Mean Well LRS-200 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure!**\n\nWhile designed around and tested with the Mean Well LRS-350-24, this enclosure has been adapted to work with with any Mean Well 200 series power supplies such as the: \n\n- LRS-200-3.3\n- LRS-200-4.2\n- LRS-200-5\n- LRS-200-12\n- LRS-200-15\n- LRS-200-24\n- LRS-200-36\n- LRS-200-48\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.46\" L x 4.53\" W x 1.18\" H (215.0mm x 115.0mm x 30.0mm) - the only exceptions being the 350 series PSU's which would benefit from a bit more material on top. If you need a enclosure for one of those, check out our LRS-350 series enclosure.\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case.\n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 245mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course.\n\n**Additional Parts / Hardware Required:**\n\n*McMaster part numbers included where applicable.\n\n1x Power Cord: \n*Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws: \nPhillips Flat Head Screw, M4 x 0.7 Mm Thread, 6mm Long \n92010A216\n\n4x Surface Mounting Screws: \n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long \n90190A113\n\n4x Magnet Inserts: \nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od \n5862K122\n\nMetric Equivalents:\n\n4x Surface Mounting Screws:\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts:\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\nBottom Shell, \nTop Shell, \nFront Grommet, \nSplit Front Grommet - Bottom Half, \nSplit Front Grommet - Top Half, \n\n**Printing Recommendations:**\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees.\n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly.\n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears.\n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general.\n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection\n\nTHOUGHT UP, DRAWN, TESTED, AND VERIFIED BY HUMANS.","imageAlt":"Mean Well LRS-200 Series Power Supply 3D printable model","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-200-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fzypidclena4d459uvigt358wd41/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-%20Hero.jpg","gridUrl":"https://media.cgtrader.com/variants/fzypidclena4d459uvigt358wd41/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-%20Hero.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-200-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6357143/4eeb47e0e9/mean-well-lrs-200-series-power-supply-enclosure-3d-model-4eeb47e0e9.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6377890","type":"listingItem","attributes":{"id":6377890,"title":"Mean Well RSP-320 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure! **\n\nWhile designed around and tested with the Mean Well LRS-350-24, this enclosure should, by all accounts work with any of the RSP-320 series power supply as they share the same exact dimensions and venting arrangement. This includes the:\n\n- RSP-320-2.5\n- RSP-320-3.3\n- RSP-320-4\n- RSP-320-5\n- RSP-320-7.5\n- RSP-320-12\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.46\" L x 4.53\" W x 1.18\" H (215.0mm x 115.0mm x 30.0mm) - the only exceptions being the 350 series PSU's which would benefit from a bit more material on top. If you need a enclosure for one of those, check out our RSP-320 series enclosure.\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case. \n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 245mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course. \n\n**Additional Parts / Hardware Required:**\n\n*McMaster part numbers included where applicable.\n\n1x Power Cord\n*Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws\nPhillips Flat Head Screw, M4 x 0.7 Mm Thread, 6mm Long \n92010A216\n\n4x Surface Mounting Screws\n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long \n90190A113\n\n4x Magnet Inserts\nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od \n5862K122\n\n\nMetric Equivalents:\n\n4x Surface Mounting Screws\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\nBottom Shell\nTop Shell\nFront Grommet\nSplit Front Grommet - Bottom Half\nSplit Front Grommet - Top Half\n\n**Printing Recommendations:**\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees. \n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly. \n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears. \n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general. \n\n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection\n\nTHOUGHT UP, DRAWN, TESTED, AND VERIFIED BY HUMANS.","imageAlt":"3D print model Mean Well RSP-320 Series Power Supply","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-rsp-320-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ntf8okm2lj4tbucqh5brsr5cnnal/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-%20Hero.jpg","gridUrl":"https://media.cgtrader.com/variants/ntf8okm2lj4tbucqh5brsr5cnnal/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-%20Hero.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-rsp-320-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6377890/f367c06266/mean-well-rsp-320-series-power-supply-enclosure-3d-model-f367c06266.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5563809","type":"listingItem","attributes":{"id":5563809,"title":"Mean Well EPP 300 400 500 Series PSU Casing Enclosure","price":16.0,"description":"Support Mean Well EEP series power supply units:\n- EPP-300-12 EPP-300-15 EPP-300-24 EPP-300-27 EPP-300-48\n- EPP-400-12 EPP-400-15 EPP-400-18 EPP-400-24 EPP-400-27 EPP-400-36 EPP-400-48\n- EPP-500-12 EPP-500-15 EPP-500-18 EPP-500-24 EPP-500-27 EPP-500-36 EPP-500-48 EPP-500-54\n\nThe PSU should be mounted with 4x M3x6mm screws and 4x M3x5mmx4mm brass heat set inserts.\n\nOutline dimension size: \n- 132mm x 43mm x 81.2mm\n\nSupport dual side mounted 40mm DC 12V fans (4010/4020 etc.) mounted by standard M3 FHCS.","imageAlt":"3D print model Mean Well EEP 300 400 500 Series PSU Casing","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/mean-well-eep-300-400-500-series-psu-casing-enclosure","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/LDU2cAgGiD1p9H8EXvFf5sgR/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/EPP-400-XX_case_front_whole.jpg","gridUrl":"https://media.cgtrader.com/variants/LDU2cAgGiD1p9H8EXvFf5sgR/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/EPP-400-XX_case_front_whole.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/mean-well-eep-300-400-500-series-psu-casing-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":72,"name":".stp","is_native":false},{"id":null,"name":null,"is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"electronics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Electronics","schemaImageUrl":"https://img-new.cgtrader.com/items/5563809/26eca6c3e2/mean-well-epp-300-400-500-series-psu-casing-enclosure-3d-model-26eca6c3e2.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6375048","type":"listingItem","attributes":{"id":6375048,"title":"Mean Well LRS-450 Series Power Supply Enclosure","price":5.8,"description":"**Make your electronics and lighting projects a bit more elegant, presentable, and (possibly) safer with our decorative power supply enclosure!**\n\nDesigned around and tested with the Mean Well LRS-600-12, this enclosure has been modified to work with any member of the Mean Well 450 series (which, by all publicly available information shows that all in the 450 series supply are a shorter version of the 600 series supplies – even sharing the same venting arrangement). This includes power supplies such as the: \n-\tLRS-450-5\n-\tLRS-450-12\n-\tLRS-450-15\n-\tLRS-450-24\n-\tLRS-450-35\n-\tLRS-450-48\n\nIn theory, these enclosures should also work with any power supply that has the same venting arrangement and dimensions of: 8.86\" L x 4.88\" W x 1.38\" H (225.0mm x 124.0mm x 35.0mm).\n\n\n**The Design:**\n\nThe enclosure is made up of two halves which simply sandwich your power supply in between. There’s also an optional front grommet which allows frictionless cable passage and helps further obstruct / conceal the terminal block. Depending on whether your installation is a bit more permanent, or you’re likely to remove the top cover frequently, there are single and split versions of the grommet included. There are mounting screws bosses in the bottom which allow secure fastening of the bottom cover to your power supply (only truly needed if your power supply will be mounted in a dynamic environment or if you want to hang it on a wall or upside down). The top cover, on the other hand, has pegs which simply press fit into the corner bosses for a secure fit. If you want to ensure the top cover doesn’t budge, you also have the option of drilling out the pegs in the top cover to ⅛” and squeezing in some 0.125in x 0.375in magnets, or gluing in some 3mm x 10mm magnets if working with metric hardware (holes are drawn at 0.118in or 2.99mm to give you both options. Neodymium magnets recommended for best hold. Obviously, you also have the option to just glue the top cover in place but, be absolutely sure you’re ok with the PSU being ‘permanently’ installed in that case. \n\nIn hopes of making this project as easy and accessible as possible, these parts were primarily engineered with FDM printing in mind. That said, they're completely SLA, SLS, SLM, MJF, and MJ compatible as well. At just under 253mm long, they easily fit on a Bambu Lab (or similar) printer, and sport features that are drawn to build successfully using a standard 0.4mm nozzle. No matter what process you end up using, there is some wiggle room in the tolerances and you should not need to do much or any post-processing to get everything to fit - that’s if your settings are dialed in, of course. \n\n\n**Additional Parts / Hardware Required:**\n\n*McMaster part numbers included where applicable.\n\n1x Power Cord - Also, don’t forget to flip the switch on the side of the power supply to the voltage that matches your outlet.\n\n4x Enclosure Fastening Screws\nPhillips Flat Head Screw, M4 x 0.7 Mm Thread, 6mm Long - 92010A216\n\n4x Surface Mounting Screws\n#4 Phillips Rounded Head Screws For Sheet Metal, 3/4\" Long - 90190A113\n\n4x Magnet Inserts\nNeodymium Magnet, Magnetized Through Thickness, 3/8\" Thick, 1/8\" Od - 5862K122\n\n**Metric Equivalents:**\n\n4x Surface Mounting Screws\nM2.9x19mm Phillips Rounded Head Screws For Sheet Metal\n\n4x Magnet Inserts\n3x10mm cylindrical neodymium magnet - magnetized through thickness (typical cylinder magnet).\n\nPlease note / friendly reminder: Do not get stainless steel surface mounting screws if you intend to add magnets to help the top cover stay fixed.\n\n\n**File Package:**\n\nIncluded in this download are five high resolution meshes:\n-\tBottom Shell\n-\tTop Shell – Magnetic Retention (If you plan to add magnets to the top cover).\n-\tTop Shell – Press Fit (If you intend to rely on pin friction for hold).\n-\tFront Grommet\n-\tSplit Front Grommet - Bottom Half\n-\tSplit Front Grommet - Top Half\n\n\n**Recommended Print Settings:**\n\nIf printing FDM, we strongly recommend going with a 0.4mm nozzle, 0.2mm layer heights, and sticking with a 100% infill for maximum strength. Print big-face down on a bed surface of your choosing. Rectilinear infill works best for all layers up to where the internal ribs start, however, stick to concentric infill thereafter just to minimize the amount of tiny fill patterns the printer has to do to fill a 1.6mm thick shell / keep your printer from shaking itself to bits.\n\nIf you want to save on material and cut print time, you could try printing in a stronger material (fiber reinforced), starting with 2 bottom layers, 4 infill layers after, and then cap with two top layers before switching to a 100% filled concentric pattern for the remaining layers of the print. You shouldn’t need any supports as all of the angles are around / less than 45 degrees. Lastly, the corner pins are little long and can be a little fragile if layer adhesion is an issue. To minimize the risk of snapping, try gluing in a portion of 1/8in - 3mm rod, using a very self-adhering material, or just sticking to the shorter pinned \"press fit top cover.\"\n\nFor SLA, slice at a 45 degree angle with enough supports to successfully start and hold the print towards the end of the build. Also make sure you have your shrinkage dialed in.\n\nFor SLS and MFJ, make sure to allow proper cool down to ensure the shells don’t warp. Also, you may need to sand the parts a little around the boss to make the press fit just a little smoother.\n\nFor SLM, some post machining may be needed around the mating points.\n\nNo matter which process you choose, we do recommend going with a rubber material for the front grommet. ShoreA 65 works, looks, and feels cool - something harder is probably just as good. Just make sure to remove any blobs and strings should you have any so the grommet presses in firmly but smoothly. \n\nApart from that, we recommend just practicing good printing habits such as: make sure you dry your filament - dial in your print settings before printing - print on a PEI, gluestick, or with some circle pads / skirt if bed adhesion is a concern - print in an enclosure if you’re worried about warping and layer adhesion (especially if printing PETG, Nylon, or ABS), and don’t start assembling anything until you’re confident you’ve got a strong / successful print that you’re willing to work with (don't hesitate to reprint if necessary).\n\nLastly, if your slicer software doesn’t automatically interpret the correct units / scale try scaling by 25.4x or 2540% (if it imports really small) or, 0.0393701x or 3.93701% (if it imports really big).\n\nPlease feel free to reach out if you get stuck or need help at any point in the process. Additionally, if you find or think of any improvements, let me know - definitely all ears. \n\n\n**Warning!**\n\nPlease note: big, big “maybe” on the “safer” claim above as carelessness and stupidity know no bounds, and accidents can and do happen. That said, the enclosure does cover/obscure the terminal block, reducing the chances of accidentally sticking something in there that doesn't belong, causing a short, and consequently resulting in shock or damage. Regardless, make sure to follow all of the manufacturers recommended safety procedures and just practice responsible electrical practices in general. \n\n\n**Alternate Versions:**\n\nNeed an enclosure for a different power supply? Consider buying in to our whole Power Supply Enclosure collection - find it in our list of posted designs or search FromTheCOR - Power Supply Enclosure Collection","imageAlt":"Mean Well LRS-450 Series Power Supply 3D printable model","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-450-series-power-supply-enclosure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/o882jdax4el79o2to6uskr6flfd4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0%20-%20Hero-450.jpg","gridUrl":"https://media.cgtrader.com/variants/o882jdax4el79o2to6uskr6flfd4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0%20-%20Hero-450.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/mean-well-lrs-450-series-power-supply-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6375048/42cfe7bd4c/mean-well-lrs-450-series-power-supply-enclosure-3d-model-42cfe7bd4c.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2425175","type":"listingItem","attributes":{"id":2425175,"title":"Prusa MK3S Enclosure Frame Support and PSU Mount","price":6.99,"description":"I was building a LACK Enclosure for my Prusa MK3S printer and read that the power supply unit (PSU) should ideally be kept outside the enclousre as the electronics inside should not be exposed to high temperatures for long term.\n\nI wanted to design and support for the frame after the PSU was removed (as the one from Prusa didn't fit the new black power supply shipped with my unit) and yet wanted the optoin of mounting the PSU back onto the frame should I decide to bring the printer somewhere. \n\nSo I designed 2 sockets on the frame and 2 square \"hooks to slot into the sockets. The Square Hook is screwed onto the PSU using hte same holes used to mount the PSU previously.\n\nI designed it to use the original screws and the spare nuts shipped with the prusa printer.\n\nAlso check out my \"Under Table Mount\" for the PSU which uses the same square hook.","imageAlt":"3D print model Prusa MK3S Enclosure Frame Support and PSU","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/prusa-mk3s-enclosure-frame-support-and-psu-mount","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MbxroX1T4zwVtBLGbo3NRaX5/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/PrusaFrameSupport1.jpg","gridUrl":"https://media.cgtrader.com/variants/MbxroX1T4zwVtBLGbo3NRaX5/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/PrusaFrameSupport1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/prusa-mk3s-enclosure-frame-support-and-psu-mount","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2425175/c9d7ca1263/prusa-mk3s-enclosure-frame-support-and-psu-mount-3d-model-c9d7ca1263.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2425238","type":"listingItem","attributes":{"id":2425238,"title":"Prusa Enclosure Clip on PSU Mount Holder Ext Control Bracket","price":19.99,"description":"I designed this files while doing up my Lack enclosure from prusa website. I wanted to fix the PSU and Controller outside of the enclosure and yet wanted to have the option to quickly mount them back where they used to be if I wanted to take my printer somewhere.\n\nMany hours have been spend on testing and re-designing the files so they will fit the Prusa MK3S once you print them out.\n\n","imageAlt":"Prusa Enclosure Clip on PSU Mount Holder Ext 3D model 1","url":"https://www.cgtrader.com/3d-model-packs/prusa-enclosure-clip-on-psu-mount-holder-ext-control-bracket","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/TK1ZZaMRjb4aqD1vT5tizRkD/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/prusa-enclosure-mk3s-print-controller-mount-control-bracket-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/TK1ZZaMRjb4aqD1vT5tizRkD/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/prusa-enclosure-mk3s-print-controller-mount-control-bracket-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-model-packs/prusa-enclosure-clip-on-psu-mount-holder-ext-control-bracket","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2425238/79f6e86d12/prusa-enclosure-clip-on-psu-mount-holder-ext-control-bracket-3d-model-79f6e86d12.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1993323","type":"listingItem","attributes":{"id":1993323,"title":"DPS3005 max 32V  5A DIY Power supply case","price":5.0,"description":"This is our case design for a DPS3005 0-32VDC / 0-5A laboratory design with many connection options. \nThe micro-usb is for USB connection to PC.","imageAlt":"DPS3005 max 32V 5A DIY Power supply case 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/dps3005-max-32v-5a-diy-power-supply-case","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MUEnbqeaCRSz7VZXY5vEqeEG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20190616_123358.jpg","gridUrl":"https://media.cgtrader.com/variants/MUEnbqeaCRSz7VZXY5vEqeEG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20190616_123358.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/dps3005-max-32v-5a-diy-power-supply-case","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"electronics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Electronics","schemaImageUrl":"https://img-new.cgtrader.com/items/1993323/609c470465/dps3005-max-32v-5a-diy-power-supply-case-3d-model-609c470465.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4715509","type":"listingItem","attributes":{"id":4715509,"title":"Meanwell RSP-320 case","price":6.99,"description":"This is a 3D-printable full-body case with a removable lid for a Mean Well RSP-320 series power supply (fits all models in the series, e.g. RSP-320-24 or RSP-320-12). The case will prevent direct contact with the metal body or terminals of the PSU making it safer to use. It has all the vent cutouts the PSU has as well as all the mounting holes. PETG or other material withstanding temperatures above 70 degrees Celcius is recommended for printing.","imageAlt":"Meanwell RSP-320 case powersupply 3D print model","url":"https://www.cgtrader.com/3d-print-models/gadgets/other/meanwell-rsp-320-24-case","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6dNKCD8MKDGr44SjnYor8XiF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/case1.jpg","gridUrl":"https://media.cgtrader.com/variants/6dNKCD8MKDGr44SjnYor8XiF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/case1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/other/meanwell-rsp-320-24-case","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/4715509/bcec37b59b/meanwell-rsp-320-case-3d-model-bcec37b59b.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4930069","type":"listingItem","attributes":{"id":4930069,"title":"Mini ITX Flex ATX 5l","price":49.99,"description":"Mini ITX Flex ATX 5l - 3D model print.\n\nFile format: STL\n\nSuitable components\n\nMotherboard - Mini ITX (17cm x 17cm)\nCPU cooling height - 45mm\nPSU - Flex ATX\nGPU - 190cm 2 slot\nRiser - 10cm\nUSB 3.0 Front panel\nPower button - 19mm\n\nRacks for mounting the motherboard - M3x6+5 - 4 pcs (M3*5mm -4 pcs Screw)\nRacks for mounting the case - M3x4 - 4 pcs (M3*8mm -4 pcs Screw)","imageAlt":"3D print model Mini ITX Flex ATX 5l","url":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/mini-itx-flex-atx-5l","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MuU1PDNkEUcQFJMTVrsxe23t/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/MuU1PDNkEUcQFJMTVrsxe23t/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/mini-itx-flex-atx-5l","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"pc-laptop","categoryTitle":"Gadgets","subcategoryTitle":"PC \u0026 Laptop","schemaImageUrl":"https://img-new.cgtrader.com/items/4930069/661b49d7eb/mini-itx-flex-atx-5l-3d-model-661b49d7eb.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6880572","type":"listingItem","attributes":{"id":6880572,"title":"ASU-57 ","price":21.0,"description":" Scale model in STL, IGES, STEP and Solidworks formats - 1/87\n\nThe ASU-57 was a small, lightly constructed Soviet assault gun specifically designed for use by Soviet airborne divisions. From 1960 onwards, it was gradually phased out in favour of the ASU-85.","imageAlt":"3D print model tank ASU-57","url":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/asu-57-bf6ae810-a026-4b5b-8261-70754f6f6f61","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/2bcj6662emnxq5d63zq1ea0uahxu/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/A1a.jpg","gridUrl":"https://media.cgtrader.com/variants/2bcj6662emnxq5d63zq1ea0uahxu/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/A1a.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/asu-57-bf6ae810-a026-4b5b-8261-70754f6f6f61","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":59,"name":".sldprt","is_native":true},{"id":51,"name":".stl","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/6880572/1c399cea79/asu-57-3d-model-1c399cea79.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"7006568","type":"listingItem","attributes":{"id":7006568,"title":"Dorohedoro Asu Chibi","price":2.0,"description":"Add a rare and stylish piece to your collection with this Asu Chibi Figure from Dorohedoro, a fan-made stylized collectible inspired by the mysterious and beloved character from the dark fantasy anime and manga. Designed in an adorable chibi art style while preserving Asu’s recognizable features and personality, this figure blends cute aesthetics with the gritty charm of Dorohedoro.\n\nPerfect for anime figure collectors, Dorohedoro fans, manga enthusiasts, and resin 3D print collectors, this detailed miniature makes a standout desk display, shelf collectible, or unique anime gift. Whether you’re building a Dorohedoro figure collection, looking for rare character merch, or searching for a custom 3D printable anime model, this chibi Asu figure is a must-have.\n\nGreat for fans of chibi anime statues, seinen collectibles, custom resin figures, and Dorohedoro fan art models, this collectible brings the strange and chaotic world of Hole to life in a fun stylized form.","imageAlt":"Dorohedoro ASU Chibi 3D print model","url":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/dorohedoro-asu-chibi","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a2m3ffa2yt75unj9fzul2x8f739j/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/P4.jpg","gridUrl":"https://media.cgtrader.com/variants/a2m3ffa2yt75unj9fzul2x8f739j/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/P4.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/dorohedoro-asu-chibi","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":117,"name":".gltf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"figurines","categoryTitle":"Miniatures","subcategoryTitle":"Action Figures \u0026 Statues","schemaImageUrl":"https://img-new.cgtrader.com/items/7006568/8b448f3fb1/dorohedoro-asu-chibi-3d-model-8b448f3fb1.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6718449","type":"listingItem","attributes":{"id":6718449,"title":"NFL - Funny Florida Gator Mascot vs Crying Seminole Baby","price":25.0,"description":"Funny Florida Gator Mascot vs Crying Seminole Baby - \"I'm Your Daddy\" Rivalry 3D Print STL File\nOwn the \"Sunshine Showdown\" rivalry with this hilarious, high-detail 3D printable figure! This model captures the ultimate dominance of the Florida Gator mascot as he sits casually, holding a crying baby dressed in rival Seminole gear.\n\nThe scene is completed with a savage wooden sign that reads: \"YOU KNOW I'M YOUR DADDY, RIGHT?\" – the perfect trash-talk statement for any die-hard Gators fan.\n\nWhy this STL is a must-have:\n\nIncredible Sculpting: As seen in the grey renders, the textures are top-notch. From the reptilian skin of the mascot to the feathers on the baby's headdress and the rugged rock base, every detail is ready to pop when printed.\n\nHilarious Concept: The contrast between the calm, muscular Gator and the tantrum-throwing baby makes for a perfect desk toy or game-day centerpiece.\n\nPaint-Ready: The distinct separation of elements (skin, clothes, sign, base) makes this model a joy to paint, whether you aim for realistic colors or a cartoon style.\n\nPrint-Optimized: Watertight geometry ensures a smooth printing experience on SLA/Resin or FDM printers.\n\nFile Details:\n\nHigh-resolution STL/OBJ files.\n\nInstant Digital Download.\nDon't just beat them, own them! Download and print your trophy today.","imageAlt":"3D printable model NFL - Funny Florida Gator Mascot vs 2","url":"https://www.cgtrader.com/3d-print-models/art/sculpture/nfl-funny-florida-gator-mascot-vs-crying-seminole-baby","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/gsgmmfwolnlcqpvxaaraaszqh692/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/fffff.jpg","gridUrl":"https://media.cgtrader.com/variants/gsgmmfwolnlcqpvxaaraaszqh692/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/fffff.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/art/sculpture/nfl-funny-florida-gator-mascot-vs-crying-seminole-baby","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6718449/9742f647f0/nfl-funny-florida-gator-mascot-vs-crying-seminole-baby-3d-model-9742f647f0.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6721168","type":"listingItem","attributes":{"id":6721168,"title":"FSU Seminoles Fan vs Gator Rivalry - Funny Football Caricature","price":20.0,"description":"Product Overview: This 3D model features a hulking, caricature-style Florida State Seminoles player (donning the iconic spear logo) triumphantly holding a comical Florida Gator by the neck. It perfectly captures the dominance and fun of the rivalry in a stylized, collectible format.\n\nKey Features:\n\nHigh-Quality Sculpt: Exceptional attention to detail, from the bulging muscles and vintage football gear to the textured scales of the panicked alligator.\n\nPrint-Ready: The STL file is optimized for 3D printing. Tested for manifold geometry to ensure a smooth printing process on both SLA (Resin) and FDM printers.\n\nPerfect for Painting: The deep textures and distinct boundaries make this model a joy to paint for hobbyists of all skill levels.\n\nUnique Decor: A hilarious desk accessory or shelf display for any college football fan.\n\nFile Details:\n\nFormat: STL / OBJ (Instant Download)\n\nScale: Adjustable to your preference.","imageAlt":"3D printable model FSU Seminoles Fan vs Gator Rivalry - 3","url":"https://www.cgtrader.com/3d-print-models/art/sculpture/fsu-seminoles-fan-vs-gator-rivalry-funny-football-caricature","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a2kaql3qxxrsgcootg8rktya4d5c/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/gggsdg.jpg","gridUrl":"https://media.cgtrader.com/variants/a2kaql3qxxrsgcootg8rktya4d5c/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/gggsdg.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/art/sculpture/fsu-seminoles-fan-vs-gator-rivalry-funny-football-caricature","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6721168/6a56d27522/fsu-seminoles-fan-vs-gator-rivalry-funny-football-caricature-3d-model-6a56d27522.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"4485451","type":"listingItem","attributes":{"id":4485451,"title":"OO Steam Train 11x15 Sugar Cube Round Speaker Enclosure","price":6.22,"description":"For a while, I have wondered why people put small square speaker enclosures in the round hole of the smoke box. I kept wondering why people don't use round enclosures to maximize the space in the round area of the smoke box. All the sound chip providers send out square enclosures for the sugar cube speaker. \n\nSo I decided to design a circular tube enclosure for an 11mmx15mm sugar cube speaker, the outside diameter of the enclosure is 12mm.  With this round enclosure, you are likely to get a better sound with it being a bigger enclosure.\n\nThree designs vary in length and can be downloaded and printed depending on how much room you have in the smokebox hole.\n\nFor printing, I would recommend it gets printed on a 3D resin printer.\n\nI use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.\n\nuse this link to join CGTrader and download my designs.\n\nhttps://www.cgtrader.com/designers/PJD1974?referral_id=3218445","imageAlt":"3D print model OO Steam Train 11x15 Sugar Cube Round 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/oo-steam-train-11x15-sugar-cube-round-speaker-enclosure","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/qXdA4CNDhPytAziLk4jW43sz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/2Pic%201.jpg","gridUrl":"https://media.cgtrader.com/variants/qXdA4CNDhPytAziLk4jW43sz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/2Pic%201.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/oo-steam-train-11x15-sugar-cube-round-speaker-enclosure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4485451/28364ba3a4/oo-steam-train-11x15-sugar-cube-round-speaker-enclosure-3d-model-28364ba3a4.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}}],"meta":{"totalCount":22,"currentPage":1,"totalPages":1,"perPage":120},"extractingCoreStyles":false,"priceFilter":null,"licenseFilter":null,"sortByValue":"best_match","sortByOptions":[{"value":"best_match","label":"Best Match"},{"value":"sales","label":"Top Selling"},{"value":"newest","label":"Newest"},{"value":"oldest","label":"Oldest"},{"value":"lowest_price","label":"Lower price"},{"value":"highest_price","label":"Higher price"},{"value":"trending","label":"Trending"}],"itemListId":"type_print_ready","gaList":"psu","filtersOptions":{"pricing":{"label":"Price","filters":[{"value":"premium","label":"Translation missing: en.browser.filters.premium","tagColorClass":"metaverse-listing__count-tag"},{"value":"free","label":"Free","tagColorClass":"metaverse-listing__count-tag"},{"value":"collection","label":"Translation missing: en.browser.filters.collection","tagColorClass":"metaverse-listing__count-tag"},{"value":"sale_off","label":"On sale","tagColorClass":"metaverse-listing__count-tag"},{"value":"subscribed","label":"Subscription","tagColorClass":"metaverse-listing__count-tag"},{"value":"exclude_free","label":"Exclude free","count":null}]},"modelType":{"label":"Type","filters":[{"value":"print_ready","label":"3D print","tagColorClass":"metaverse-listing__count-tag"},{"value":"cgt_verified","label":"3D Print Verified","tagColorClass":"metaverse-listing__count-tag"},{"value":"with_makes","label":"Has Makes","tagColorClass":"metaverse-listing__count-tag"}]},"polygons":{"label":"Poly count","filters":[{"value":"range_0_5000","label":"Up to 5K"},{"value":"range_5000_10000","label":"5 - 10K"},{"value":"range_10000_50000","label":"10 - 50K"},{"value":"range_50000_100000","label":"50 - 100K"},{"value":"range_100000_250000","label":"100 - 250K"},{"value":"more_than_250000","label":"250K+"}]},"fileTypes":{"label":"File formats","isSearchable":true,"filters":[{"value":"21","label":"Blender (.blend)"},{"value":"12","label":"OBJ (.obj, .mtl)"},{"value":"51","label":"Stereolithography (.stl)"},{"value":"5","label":"Autodesk FBX (.fbx)"},{"value":"17","label":"Autodesk 3ds Max (.max)"},{"value":"6","label":"Cinema 4D (.c4d)"},{"value":"11","label":"Autodesk Maya (.ma, .mb)"},{"value":"117","label":"glTF (.gltf, .glb)"},{"value":"14","label":"Sketchup (.skp)"},{"value":"96","label":"UnrealEngine (.uasset)"},{"value":"83","label":"Unity 3D (.unitypackage, .prefab)"},{"value":"127","label":"USDZ (.usdz)"},{"value":"207","label":"USD (.usd)"},{"value":"13","label":"Rhinoceros 3D (.3dm)"},{"value":"2","label":"3D Studio (.3ds)"},{"value":"8","label":"Lightwave (.lwo, .lw, .lws)"},{"value":"25","label":"Collada (.dae)"},{"value":"15","label":"Autodesk Softimage (.hrc, .xsi)"},{"value":"7","label":"DXF (.dxf)"},{"value":"33","label":"Modo (.lxo, .lxl)"},{"value":"4","label":"AutoCAD (.dwg)"},{"value":"47","label":"Shockwave 3D (.w3d)"},{"value":"59","label":"SolidWorks (.sldprt, .sldasm, .slddrw)"},{"value":"54","label":"Vue (.vue)"},{"value":"29","label":"IGES (.ige, .igs, .iges)"},{"value":"28","label":"High-Res Renderings (.hrd)"},{"value":"55","label":"Zbrush (.ztl, .zbp)"},{"value":"40","label":"Poser (.pz3, .pp2)"},{"value":"23","label":"Bryce (.br5, .obp)"},{"value":"35","label":"Maxwell Render (.mxs)"},{"value":"42","label":"Renderman (.rib, .slc, .sl, .slo)"},{"value":"48","label":"Silo (.sia)"},{"value":"60","label":"Cheetah3D (.jas)"},{"value":"63","label":"Leaderwerks (.gmf)"},{"value":"66","label":"Torque 3D (.dts)"},{"value":"67","label":"MilkShape 3D  (.ms3d)"},{"value":"68","label":"Blitz3d (.b3d)"},{"value":"70","label":"Solid Edge (.asm, .par, .psm, .dft)"},{"value":"71","label":"Autodesk Inventor (.iam, .ipt)"},{"value":"72","label":"STEP (.stp)"},{"value":"82","label":"JewelCAD (.jcad, .jcd)"},{"value":"89","label":"3D Coat (.3b)"},{"value":"90","label":"AC3D  (.ac)"},{"value":"91","label":"Artlantis (.atl, .atla, .atlo)"},{"value":"98","label":"Terragen (.tgo)"},{"value":"99","label":"Houdini (.hda, .hip, .bgeo, .geo, .bclip, .clip, .hipnc)"},{"value":"100","label":"PDF (.pdf)"},{"value":"101","label":"Substance Painter (.spp, .sbsar, .spsm)"},{"value":"102","label":"DAZ Studio (.duf)"},{"value":"103","label":"iClone (.iprop, .iAcc, .iCloth, .iAvatar, .iEffect)"},{"value":"104","label":"Alembic (.abc)"},{"value":"107","label":"Autodesk Fusion 360 (.f3d)"},{"value":"108","label":"MDL Material (.mdl)"},{"value":"110","label":"3ds Max macroScript (.ms)"},{"value":"111","label":"ArchiCAD (.gsm)"},{"value":"113","label":"CATIA (.CATProduct, .CATMaterial, .CATAnalysis)"},{"value":"114","label":"Octane Render (.orbx)"},{"value":"115","label":"Mudbox (.mud)"},{"value":"116","label":"Adobe Dimension (.asd, .dn)"},{"value":"119","label":"Python Script (.py, .pyc)"},{"value":"120","label":"Maya Mel Script (.mel)"},{"value":"123","label":"Substance Designer (.sbs, .sbsprs, .sbsar)"},{"value":"129","label":"3D Manufacturing File (.3mf)"},{"value":"130","label":"Autodesk Alias (.wire)"},{"value":"131","label":"formZ (.fmz)"},{"value":"133","label":"Strata 3D (.s3d)"},{"value":"134","label":"trueSpace (.cob, .scn, .rsobj, .rsscn)"},{"value":"135","label":"CryEngine (.cga, .cgf, .chr, .skin)"},{"value":"137","label":"Marmoset Toolbag (.tbscene, .tbmat)"},{"value":"139","label":"Alibre/Geomagic (.ad_prt, .ad_asm, .ad_dwg, .ad_smp, .ad_pkg)"},{"value":"140","label":"Marvelous Designer (.zpac, .avt, .pos, .ZPrj)"},{"value":"141","label":"Autodesk Revit (.rfa, .rvt)"},{"value":"144","label":"Biovision Hierarchy (.bvh)"},{"value":"145","label":"Lumion (.ls8)"},{"value":"146","label":"Autodesk Inventor (.idw)"},{"value":"147","label":"3D ACIS (.sat)"},{"value":"149","label":"KeyShot (.bip, .ksp)"},{"value":"183","label":"Clarisse IFX (.project)"},{"value":"184","label":"Mari (.mra)"},{"value":"185","label":"mat (.mat)"},{"value":"187","label":"MCG Tool (.mcg)"},{"value":"188","label":"VRML (.wrl)"},{"value":"189","label":"Ply (.ply)"},{"value":"191","label":"amf (.amf)"},{"value":"192","label":"GrowFX (GrowFX)"},{"value":"196","label":"Lumion (.ls9)"},{"value":"197","label":"VDB (.vdb)"},{"value":"199","label":"Lumion (.ls10)"},{"value":"200","label":"ARTCam (.art)"},{"value":"201","label":"fbm (.fbm)"},{"value":"202","label":"Coordinate 3D (.c3d)"},{"value":"204","label":"3ds Max Render Preset Settings (.rps)"},{"value":"205","label":"Twinmotion (.tm)"},{"value":"206","label":"D5 Render (.drs)"},{"value":"208","label":"Vectorworks (.vwx)"},{"value":"209","label":"Blockbench (.bbmodel)"},{"value":"210","label":"Parasolid (.x_t, .x_b)"},{"value":"211","label":""},{"value":"212","label":"SVG (.svg)"},{"value":"213","label":"Adobe Illustrator (.ai)"},{"value":"214","label":"EPS (.eps)"},{"value":"215","label":"PNG (.png)"},{"value":"216","label":"JPG (.jpg)"},{"value":"217","label":"Adobe Photoshop (.psd)"},{"value":"218","label":"Machine Training Bundle (.mtb)"},{"value":"219","label":"EXR (.exr)"},{"value":"220","label":"G-code (.gcode,, .mpt,, .mpf,, .nc)"},{"value":"221","label":"LYC (.lyc)"},{"value":"222","label":"MP4 (.mp4)"},{"value":"223","label":"Lumion (.ls11)"},{"value":"224","label":"Lychee Slicer Project File (.lys)"},{"value":"225","label":"Chitubox Slicer Project File (.chitubox)"},{"value":"226","label":"Binary G-code (.bgcode)"},{"value":"227","label":"GSplat (.splat)"},{"value":"228","label":"JSON (.json)"},{"value":"229","label":"PyTorch (.pt, .pth)"},{"value":"230","label":"PyTorch Lightning (.ckpt)"},{"value":"231","label":"YAML (.yaml)"}]},"priceRange":{"filters":[{"value":"range_2_10","label":"$2 - $10"},{"value":"range_10_20","label":"$10 - $20"},{"value":"range_20_50","label":"$20 - $50"},{"value":"range_50_100","label":"$50 - $100"},{"value":"more_than_100","label":"$100+"}]},"designers":{"label":"Designer","filters":[]},"licenses":{"label":"Content filters","filters":[{"value":"collections_only","label":"Packs only"},{"value":"exclude_3d_print","label":"Exclude 3D Print"},{"value":"exclude_editorial","label":"Exclude editorial license"},{"value":"has_video","label":"Has video"},{"value":"has_marmoset","label":"Has 3D viewer"},{"value":"exclude_ai_generated","label":"Exclude AI generated content"},{"value":"cgt_standard_only","label":"CGT Standard"}]}},"score":[{"id":"4235906","score":328185.53},{"id":"7185229","score":299962.72},{"id":"7117642","score":297376.53},{"id":"6375058","score":235165.89},{"id":"6357156","score":231345.52},{"id":"2425198","score":230728.77},{"id":"6377878","score":222230.28},{"id":"6357108","score":222185.81},{"id":"6357143","score":221026.14},{"id":"6377890","score":216034.25},{"id":"5563809","score":202427.5},{"id":"6375048","score":198279.47},{"id":"2425175","score":197788.39},{"id":"2425238","score":184805.6},{"id":"1993323","score":174811.7},{"id":"4715509","score":145560.28},{"id":"4930069","score":128230.414},{"id":"6880572","score":72.28658},{"id":"7006568","score":62.535175},{"id":"6718449","score":46.680393},{"id":"6721168","score":37.95526},{"id":"4485451","score":27.484447}],"freeItems":{"heading":"Free Psu 3D print models of the day","data":[{"id":"6514474","type":"listingItem","attributes":{"id":6514474,"title":"Sunshine ITX NAS CASE 6 SSD SFX 140mm FAN MESH","price":0.0,"description":"Hi\n\nSo it is a fully working computer case for ITX board.\nI'm in 100% author of this project, and i do not agree to edit it or publish it somewhere else without my aproval.\nI spend on it like 2 weeks of free time, and it was not that easy to design as someone might think.\n \n\nWhat you need?\n\nM5 and M4 screws\nM5x14 - 5mm or 10mm, i do NOT recommend to go with longer. Because you can hit something on the motherboard. But for back panel you can go with any lenght.\nM4x16 - 5mm or 10mm longer could work too! (psst, you can even use m3 with just simple nut and washers ;d)\nFor wind tunel use standard computer screws for fans\n\nSo about the features:\n\nYou can have up to 6 SSD with it\nSFX PSU aaand SFX-L (but cable management will be harder ;D)\n140mm front FAN, \nON/OFF switch cutout\nfully modular design\nprint without any supports!\nHEX design on front, MOBO trace, back panel\ncutouts for cable management\nmaybe more in the future\nFor print settings:\n\nPETG for MOBO trace is a MUST and bare minimum\nnozzle 0.6mm\nInitial layer height 0.2mm\nlayer height 0.2mm\n220C on V4 chinesse hot-end for P1P :D, so for original one could be 240C?\nIroning is nice for finish but sky rocked the print time (without 1D_22H and with 2D_11H :D :D :D)\nget your cooling right for your material\nspeeeed, well it's kinda up to you. I'm going with transparent PET-G so 90mm/s and accel 6k. Also using a speed by height is a nice feature, cuz you can get your first 10mm really good and hard. So the print will be stronger without the need of using a lot of material!\nInfill gyroid 20% with 3000accel, don't go HIGHER with that, cuz your print peace will go flying trough the window with it :D\nuse brim for PSU bracket, rest should be fine without it.\n\n\nIf you have found that project good, here is a page where you can buy me a coffee and vote on what i will do next: \nhttps://ko-fi.com/thesunshinedude\n\n\nOr just drop a like on my artstation: \nhttps://www.artstation.com/lukasz_kiebala\n\nSupport and request:\nkiebalalukasz2@gmail.com\nhttps://discord.gg/6NKQtxDTGQ\n\nBest regards, Sunshine","imageAlt":"Sunshine ITX NAS CASE 6 SSD SFX 140mm 3D printable model 1","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/electronics/sunshine-itx-nas-case-6-ssd-sfx-140mm-fan-mesh","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/h3pi48zlez1ikbit50sadtl8w9v6/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/ITX_CASE.jpg","gridUrl":"https://media.cgtrader.com/variants/h3pi48zlez1ikbit50sadtl8w9v6/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/ITX_CASE.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/electronics/sunshine-itx-nas-case-6-ssd-sfx-140mm-fan-mesh","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"electronics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Electronics","schemaImageUrl":"https://img-new.cgtrader.com/items/6514474/0200263cd6/sunshine-itx-nas-case-6-ssd-sfx-140mm-fan-mesh-3d-model-0200263cd6.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2568746","type":"listingItem","attributes":{"id":2568746,"title":"Meanwell SE-450 Holder for 20x20 profile","price":0.0,"description":"A simple holder to hold the Meanweoo SE-450 power supply on a 20x20 profile","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/meanwell-se-450-holder-for-20x20-profile","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fdhWsWfpWxmUbFZf4cVhkf94/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/394FEC6D-406B-41D8-A123-E77048C9037E.jpg","gridUrl":"https://media.cgtrader.com/variants/fdhWsWfpWxmUbFZf4cVhkf94/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/394FEC6D-406B-41D8-A123-E77048C9037E.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/meanwell-se-450-holder-for-20x20-profile","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/2568746/d48abed8f8/meanwell-se-450-holder-for-20x20-profile-3d-model-d48abed8f8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}}]},"tag_links":{"header":"Check other trending 3D print models","links":[{"title":"Jewelry STL files","link":"https://www.cgtrader.com/3d-print-models/jewelry"},{"title":"Dragon STL files","link":"https://www.cgtrader.com/3d-print-models/dragon"},{"title":"Cat STL files","link":"https://www.cgtrader.com/3d-print-models/cat"},{"title":"Pokemon STL files","link":"https://www.cgtrader.com/3d-print-models/pokemon"},{"title":"Warhammer 40k STL files","link":"https://www.cgtrader.com/3d-print-models/warhammer-40k"},{"title":"Colt STL files","link":"https://www.cgtrader.com/3d-print-models/colt"},{"title":"Mask STL files","link":"https://www.cgtrader.com/3d-print-models/mask"},{"title":"Snake STL files","link":"https://www.cgtrader.com/3d-print-models/snake"},{"title":"Transformers STL files","link":"https://www.cgtrader.com/3d-print-models/transformers"},{"title":"Animal STL files","link":"https://www.cgtrader.com/3d-print-models/animal"},{"title":"Skull STL files","link":"https://www.cgtrader.com/3d-print-models/skull"},{"title":"Godzilla STL files","link":"https://www.cgtrader.com/3d-print-models/godzilla"},{"title":"Sonic STL files","link":"https://www.cgtrader.com/3d-print-models/sonic"},{"title":"Dog STL files","link":"https://www.cgtrader.com/3d-print-models/dog"},{"title":"Helmet STL files","link":"https://www.cgtrader.com/3d-print-models/helmet"},{"title":"Sword STL files","link":"https://www.cgtrader.com/3d-print-models/sword"},{"title":"Wargaming STL files","link":"https://www.cgtrader.com/3d-print-models/wargaming"},{"title":"Boat STL files","link":"https://www.cgtrader.com/3d-print-models/boat"}]},"suggested_search":null,"isSimilarSearchPossible":true,"url":"/3d-models/psu","saveSearchSettings":null,"isSalesBoostEnabled":true,"subscriptionBadgesEnabled":null,"hideSuggestionsSection":null,"is_user_logged_in":false,"should_show_all_items_on_mobile":false}