Spectacular design of the chopper ghost rider motorcycle, with its mythical mythical motor, 1/8 scale with great attention to detail, from small screws to connectors for cables and hoses (you will have to use 1.75 mm non-extruded filament to bring them to life) , tire tracks and drive belt detail. Fixed motion joints (Filament pieces such as shafts and fixed joints should be used, the use of glue or glue to join several pieces permanently). with great attention to detail, from small screws to connectors for cables and hoses (you will have to use 1.75mm unextruded filament to bring them to life), tire tracks and drive belt detail. Functional suspension springs. Pendulum and fixed motion joints (Filament pieces should be used as shafts and fixed joints, the use of glue or glue to join several pieces permanently).
Although it is a project with medium-advanced difficulty but it does not require a detailed manual. I recommend that you guide yourself with the attached images, put the pieces in place before using glue, this will allow you to avoid mistakes and see the final result. The separate pieces make it possible to avoid the use of paint and to use the natural color of the filament in each piece separately, playing with infinite combinations of colors and aspects.
If you want me to make any changes to the design, add some customization, change some measurements ... etc. You are free to write me directly to facebook or instagram, if I am near a computer, I assure you I will help you immediately.