This is a model of a walker that I created in 3D-Coat for 3D-printing.The model comes in one piece and is made rather for resin printing, allthough I got decent results in FDM too. The model is sized for 32mm wargame scale, but you can resize it as you want. In my slicer, it is scaled at 300%. When I want to print for 28mm, I resize the model at 250%.

The purchase includes :walker_full.stl : the walker base STL file if you want to create your own orientation/slicing/supporting.walker_full_support_resin.stl : the STL file pre-oriented and pre-supported for resin printing. Just slice it and you should be good to go.walker_full_300_CGT_fdm.3mf : 3mf file with pre-painted supports. I verified the file with Prusa slicer and Cura slicer, and it went OK.

I have put on the description images some photos of a 28mm and a 32mm model printed in resin. The 28mm one is painted, the 32mm is the raw model after withdrawing the supports. Both were printed on a Prusa SL1S speed at normal level of details (0.05mm).

Licence note : Please read carefully the custom licence. This file is for your personnal use only. You cannot resell 3D prints or derivatives of this model. I don't grant licences for resellers or people offering printing service on other platforms.