Uruk Hai

Uruk Hai 3D print model

An angry Uruk Hai swordsman on the battlefield

Model designed for 3D Printing. Comes in .OBJ formats and already sliced Chitubox files for instant printing.

  • UrukHai_Obj- OBJ Version of the model. It comes splitted in keyed parts: ArmLShield, ArmRSword, Base, Head, LegLeft, LegRight, Torso

  • UrukHai_STL- STL Version of the model. It comes splitted in keyed parts: ArmLShield, ArmRSword, Base, Head, LegLeft, LegRight, Torso

  • ZbrushTool - ZTL Version with the keyed subtools (decimated)

  • *UrukHai_Chitubox *- .chitubox files hollowed and supported for printing. Comes in keyed parts: UrukHai_Arms_chitu_hllw, UrukHai_Base_chitu_hllw, UrukHai_Head_chitu, UrukHai_Legs_chitu_hllw, UrukHai_Torso_chitu_hllw

  • UrukHai_Sliced Chitubox CTB (Big) - Sliced .ctb parts 3dprint ready for Elegoo mars2 and bigger. Settings are for water-washable resin: Exposure Time: 7s. Bottom Exposure:60. Layer Height .05mm, Lift Distance 5mm, Lift Speed 70mm/min, Retract Speed 180 mm/min. Model height is 22cm or 8.5 inches, approximately. Comes in Keyed Parts: Arms_BIG, Base_BIG, Head_BIG, Legs_BIG, Torso_BIG.

Since I'm working with Elegoo printers, I'm also adding my Chitubox sliced files (.ctb) for convenience. They are set and ready to print with supports and orientation. They are scaled for the Mars 2 Pro, but I don't think the parts should have any trouble with bigger printers such as the Saturn or the Mars 3. Also, the settings that they were saved in haven't given me a fail with Anycubic and Elegoo resins after printing several figures.

Modelled using Zbrush.

This is my second public model for 3d Printing. Please let me know how you like it. I haven't had any problems, but send me a message if you experience anything out of the ordinary. Let me know if you'd like to see any other models in the future.

Some parts might need a little sanding to fit in. Painted figurine on pictures was 3dPrinted and painted by hand using brushes only. Consideration to fit head: Try getting the hair on the back first, align head and push down.

I do not own the Lord of the Rings or the Uruk Hai name or IP.

Item rating
0 0
Uruk Hai
$16.00
 
Editorial License 
Uruk Hai
$16.00
 
Editorial License 
Response 94% in 4.1h
3D Modeling
3D Print Modeling
Low-poly Modeling
Rendering
UV mapping
Texturing
PBR modeling

3D Model formats

Format limitations
Native
  • Zbrush 2022.0.5 (.ztl, .zbp)109 MB
Exchange
  • Stereolithography (.stl)330 MB
  • OBJ 2018 (.obj, .mtl)235 MB

3D Model details

  • Publish date2022-05-25
  • Model ID#3772657
Help