Illuminate and accentuate your grande entrace foyer with this opulent Chandelier (although technically a Victorian 'Gassolier').

Total height is approx. 130mm although can be scaled in slicing software.

5 of each part will need printing excuding the 'core'.

Highly reccomend using a resin printer or a material jet printer due to the complexity.

There is a .75mm hole running through all of the 'arms' to allow for micro SMD to be fitted like I have- However your printer will need to be very finely tuned to print a continual hole. (Mine took several attempts before I cracked it. Alternatively- if your SMD wire is thin enough, just wrap it around the 'arms' and paint over them.

This Model is 1/12 scale