
Gazebo Bird Feeder 3D print model
This inspired by a Gazebo Bird feeder will make the little birds in your garden very happy. If you put some food in it, of course ;-)
This bird feeder is super easy to print because it is just one peace. Just print & go. This design is also made to print without print support material to save filament.
You can suspend it from a tree branch with a little rope. This rope is fed trough the hole on the top. On the end of the rope a knot is made so it can not come out. This hole on the top has a diameter of 4 mm.
The hight of this feeder is 152mm. The diameter of this feeder is around 110mm. Of course you can scale it up or down, if you like. At 100% size you will need around 142 gram of filament (with 0.4mm Nozzle, 0.2mm resolution, 2 wall lines, 4top/bottom layers & 15% infill).
If you have questions, feel free to ask :-)
- Cool design!
- Thanks! :-)
- It printed well. Thank You