Bird House Cathedral style 3D print model

Bird House Cathedral style

This save Haven for small Birds can be filled with food, giving the a pace to eat. They can enter from each of the four sides. In the Tower is a seed dispenser that can also be filled with Food. This way the bigger Birds do not get excluded :-)

The Bird Feeder was inspired by the Gothic Cathedral Architecture. But I gave it a bit of a twist to make it more Bird House like :-)

The Birdhouse can be placed on the ground or be hang from its Tower. For cleaning the center bottom floor is removable.

I found that a thin Glue works best (when testing this model).

To help you understand how to put it all together, a sort of Manual is included with the files. It's basically the same as the 12 screen shots included with the Photos.

The Files are in STL format and are FDM 3D Printer tested.

With the settings below:

0,4mm Nozzle 0,2 mm resolution /layer hight 4 top & bottom layers 3 wall layers (but for smaller peaces like the windows 2 wall layers) infill 20% (but 15% is also possible for some parts) Skirt 2 lines

it needs around

White PLA around 2900 gram Green PLA around 550 gram PET-G around 10 gram.

of material to make it like the Photo's

With the below Print Speed Settings it sould take around 313 hours

print speed 38mm/s wall speed 30mm/s inner wall 30mm/s top/bottom 25mm/s travel 60 mm/s initial layer 25mm/s Retract distance 6,5 mm

If you have questions please ask :-)