Pen Holder 3D print model

STL FILE READY FOR 3D PRINTING

Hold my pen holder - Great Gift!

PLA Layer height of 0.18mm Initial layer height 0.2 20% infill (don't go under this) No support Build Plate Adhesion Type: Brim (Brim Line count:5)

Model size: X 100 × Y 70.8 × Z 88.5 mm For thicker pens increase the size by 10% in Slicer

Final painting as desired. For this model I use:

1. Sandpaper 180
2. Spray Filler (Repair spray)
3. Sandpaper 400+800
4. Spray Paint

good luck!