Wave is a table lamp which shape plays with the concept of material presence and emptiness. The diffuser is made with a low wall thickness in order to screen the light and make it softer.
The powercable remains exposed and gains a stylistic value. The technical element of the socket with its ring becomes the connector between the two mail elements, removing the need for joints.
Dimensions when assembled: 190 x 190 x 210 mm A 200x200x200 printing volume will be enough.
Material is PLA, but any other option should work too.
Don't stretch the model, it requires a specific hole diameter to fit the socket.
To be completed, it just requires an E14 socket and an E14 Led Bulb.
What's simpler?
Check the rest of the collection on my profile!
3D PRINTING SETTINGS Model thickness is 0,8 mm for diffuser and 1,2mm for the base.
For a good lighting result it is suggested to generate the wall with wall line count: 2, using a 0.4 mm nozzle and a layer height of 0.2 mm.
At least for the diffuser, is important to set the seam in only one point, so as to have a very clean surface.
No support is required. No post-printing is required.
Use a dark color for base and a light color for diffuser.