Ring Lamp 4 3D print model
Design from Wood This is jet another Ring Lamp Design. This Ring Lamp and the other 2 that came before, were first made of 18mm Plywood (I added some pictures of it in the photo section). Later I made the 3D printable Versions. I included some Pictures with the three 3D printed Lamps. Ring Lamp4 is the gray one in the front. This is the fourth Ring Lamp I made in wood, but the third I made for 3D printers.
Making this Lamp When assembled this Lamp is around 229mm high and 192mm wide. To print the parts you need a 3D printer with an 200mm x 200mm print Bed. I tested this model on 2 FDM printers with an 0.4mm Nozzle and 0.2mm Print Resolution. The Filament I used is made of PLA. You need around 426 gram of Filament and it took me around 45 hours to print. In the Photo section I included a list with the printing Time and Filament use for more detailed information.
Concept I also included an image that shows all the (STL) parts with their File names, to give you an better idea how the parts come together. Next to that there is an image that shows you how to assemble the parts in 17 steps. I also included a 3mf & obj File that show all the Parts assembled to give you an 3D view in advance.
Additional parts Next to the Filament you also need 2 M3 Nuts and 2 M3x16mm Bolts. You also need a Lamp Bulb and matching Bulb Fitting. I used an E14 Fitting and E14 LED Bulb. As last you need a electrical Cord with wall Plug to connect your Lamp Bulb to the mains.
If you have any questions, feel free to ask them :-)