ENFirst in the Morfix collection. The starting point of the series.An original creation by Morfix, inspired by the elegance of whisky bottles and the fluid shapes of contemporary design.

This pack includes 1 bottle and 2 stoppers in STL format, ready for 3D printing.

Includes:– “Vertex” Bottle (original form)– “Vertex” Bottle Stopper 1 (classic design)– “Vertex” Bottle Stopper 2 (minimalist design)Versions of the bottle with each stopper embedded are also included.

Perfect for decoration, collecting, or creative design projects.

Created in Portugal | Designed in Portugal(This is a digital model only. No physical product will be shipped.)

Bottle (without stopper): 113 × 113 × 280 mmStopper A (separate): 47 × 47 × 135 mmStopper B (separate): 43 × 43 × 135 mmBottle with embedded stopper A: 113 × 113 × 372 mmBottle with embedded stopper B: 113 × 113 × 364 mm

If your 3D printer has a maximum build height of 300 mm, it is recommended to print the following models at reduced scale to ensure full compatibility:

Bottle with embedded stoppers A: 85 × 85 × 280 mmBottle with embedded stoppers B: 87 × 87 × 280 mm

3D printing settingsENModel ready for 3D printing. It can be printed using FDM (filament) or SLA/DLP (resin) technology. Recommended scale: 100% (model is already at real size). Version with embedded stopper: single-piece print. Version with separate stopper: manual assembly after printing. Settings such as temperature, speed, and infill should be adjusted according to the printer and material used. The model was designed to be printed without supports, but they can be enabled if needed. The bottom of the bottle has a small hole, users may slightly enlarge it to improve stability.