MOAI LAVA LAMP 3D print model

This is a Moai Lava Lamp. You can print it without supports. Then put some tape on the lines and then paint it all over. Remove the tape and put some RGB light inside. It will blow your mind!!!

Print parameters. 0.3/0.2 layer its fine for a 0.4mm nozzle. I recomend use a 0.6/0.8 on 1mm nozzle to speed up things. I used a 1mm nozzle in a Anet E12. 35cm height You can use some rafts, just in case. I also use the cura option forro difuso (in spanish). It will give a real stone look!!!

Three files. -Solid Lava. -Hollow Lava - 2mm wall thickness. -Hollow Magma

I´m using the Cura option forro difuso (In Spanish) to give the surface a stone imitation. The figure has a 2mm wall thickness, and the other one is solid. Currently printing with a 1mm nozzle - 11 hours approx Then i'll paint with rustoleum simil stone. No other post-printing. No supports. Do not print in ABS.. bad experiencie! (is winter here jaja)

If you liked this model please let me know! And if you can buy me a coffee I'll be very very very thankful. Happy printing!

PARÁMETROS DE IMPRESIÓN 3D 0.3/0.2 layer its fine for a 0.4mm nozzle. I recomend use a 0.6/0.8 on 1mm nozzle to speed up things. I used a 1mm nozzle in a Anet E12. 35cm height You can use some rafts, just in case. I also use the cura option forro difuso (in spanish). It will give a real stone look!!!

Three files. -Solid Lava. -Hollow Lava - 2mm wall thickness. -Hollow Magma

    This product has no reviews yet
    MOAI LAVA LAMP
    $4.00
    All prices are exclusive of VAT
    Save with CGTrader Credits
    Royalty Free License
    Products under Royalty Free License can be used without liability to pay any license fees for<br/> multiple lifelong uses, or sales volume of final product after being paid for once. The product<br/> may not be sold, given, or assigned to another person or entity in the form it is downloaded from the site.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
    Response - % in - h
    3D model formats
    • Stereolithography (.stl) (4 files)-
    3D model details
    • Publish date2020-06-13
    • Model ID#2467233
    Help