STAR FOX 64 - Lylat Wars - Arwing - 3D print model

Check your G-Diffuser system! New project incoming!

I grew up in the N64 era. Therefore, I have lots of fond memories of the N64 games. As with the Mario Kart, I really liked the design of the Star Fox 64 Arwing. So, I decided that the Arwing will be my next 3D design and 3D printing project that I’m going to share with you. The model represents the higher detail version of the Star Fox 64 (Lylat Wars) Arwing that can be seen on the box art and posters.

Features

• The wings are articulated that they can be displayed in the positions: closed, open and all-range-mode
• The Arwing can be displayed with different flap positions on the wings: closed, up, down, open
• The Arwing can be displayed with closed or open Dual-Lasers.
• Easy exchange of flaps and bottom laser generator part via magnets (not included). Magnet dimensions: 5x1mm (The magnets I used can be found here: https://amzn.to/3vyqbX1 *)
• Cockpit interior
• Articulated Canopy
• Decals for the SF-Wing logo, the Fox in the back, the yellow arrow on the nose and the bord computer. The decal sheet is available in PNG and SVG format.
• Presupported STL files for resin printing are included (multiple parts on build plate).
• Printable Bomb and Dual-Laser Item
• Additional thinner canopy to print with clear resin
• Display stand
• PDF instructions
• Medium Arwing STL-files (7 parts, 270mm long)
• Smaller Arwing STL-file to print in one piece, 100mm long (also as presupported STL)

Data

• Length: 427mm
• Width: 310 - 560mm (Wings closed – Wings in All-Range-Mode)
• Hight: 133mm
• Parts to print: 35 (46 including optional parts)

Info

Use the program 7-zip to extract the ZIP-files

You purchase digital STL files for 3D printing!

All files are tested and successfully printed with a resin printer (Photon Mono) and assembled by me. Recommended printer build volume: 130x80x165 (WxDxH) The model is designed and optimized for resin printing. But you can also print it with an FDM printer. The parts are not oriented in the ideal printing orientation by default. Orient them in a way that fits best for your printer. Choose suited support structures, if needed. Or use the included presupported STL files for resin printing.

For more pictures of the finished model and making of, please visit my Instagram: https://www.instagram.com/nerd_maker_engineer

.

.

.

.

(*) Alle amzn.to Links sind Amazon Affiliate Links. Werden Käufe über diese Links getätigt, erhält der Linkersteller eine Provision von Amazon. Der Preis für den Käufer (euch) ändert sich dadurch natürlich nicht.

All amzn.to links are Amazon Affiliate links. A percentage of sales is made through Affiliate links.