Model Railway Concrete Pipe Culverts 3D print model

Concrete Culverts as typically found near road or railways to allow water, people or farm animals to pass through without effecting the railway or road. To create a tunnel under the railway you will need to print an entrance section for both sides and may need to print multiple box sections to cover width of railway or road.

If you like these but require something a little different then please approach me via this site to do a project for you.

There two versions included, both come with straight or angled entrance. See photos for more information. The box section culverts are based on internal dimensions, the following dimensions are real life measurements and not the models. The two standard dimensions used are 2.5m x 2m and 2.5m x 1m, wall thinkness is 0.25m. I have test printed these on a Anycubic Photon Resin Printer

This has been modelled at OO Gauge, 1/76 scale, if you need them a little bigger or smaller then just change the scale when printing. for HO Gauge print at 87%, 1/87 scale, for O Gauge UK print at 175%, 1/43.5 scale, for O Gauge International print at 158%, 1/48 scale. for N Gauge UK print at 51.5%, 1/148 Scale. (Caution: I have not test printed this in this scale).

All items can be easily printed on resin and filament printers, print size is dependant on print area. As per normal with my designs there is a balance between accuracy and printability, hopefully not affecting the design of the model too much.

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design and develop new items for me to share. For £2 a month you will give me basic support and for £4 you will get insight into my new designs and be able to contribute with my future projects.