LCT Mk 4 - Landing Craft Tank Mark 4

LCT Mk 4 - Landing Craft Tank Mark 4 3D print model

Model of LCT - Mark 4.

The model has been prepared and detailed for 1:100 wargaming. Meaning the railing is a bit stronger to prevent breaking to easy. It is waterline model and not a complete hull design. The Hull would be below water and would not work on a gaming table. The model is based on original drawings.

Test-printed on a Creality Ender-5 FDM in 020mm layer and Anycubic Mono SE 004mm layer. The whole model can be printed on a FDM printer. Just the 2 stl-files starting with RESIN- are, yes you guessed it; RESIN only. But those parts are also provided in a FDM version with less detail. Total of 40 seperate stl-files.

The 3D-prints of Railing-slope-deck-2-needed.stl needs to be bent after printing to fitt the deck correctly. Main reason is that it is more easy to print it flat on the printer-bed. (See picture Railing-slope-deck-2-needed-example.png ) If needed you can cut the stl in smaller pieces and glue it together on the craft.

I have added the complete hull, but also cut in 4 parts. I used those cuts for test-printing. But if you have large bed-dimension you could cut the model yourself. If you do print the cut parts flat on the bed, make sure to add support (print-bed support only). There is a small extension along the hull which requires support.

The 20 mm oerlikon gun is NOT included as that is not my model, there are free designs availalbe for the 20 mm Oerlikon. For example my own free models; https://www.cgtrader.com/free-3d-print-models/miniatures/other/20mm-oerlikon-navy-anti-aircraft-gun

Item rating
0 0
LCT Mk 4 - Landing Craft Tank Mark 4
$15.00
 
Editorial License 
LCT Mk 4 - Landing Craft Tank Mark 4
$15.00
 
Editorial License 
Response - % in - h
3D Print Modeling
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl)5.2 MB

3D Model details

  • Publish date2021-11-14
  • Model ID#3330136
Help