
121114 Boeing 737-800 Split Scimitar Up 3D print model
The Boeing 737 Next Generation, commonly abbreviated as 737NG, or 737 Next Gen is a narrow-body aircraft powered by two engines and produced by Boeing Commercial Airplanes. The Boeing 737-800 is a stretched version of the 737-700. It replaced the 737-400. The 737-800 seats 162 passengers in a two-class layout or 189 passengers in a one-class layout. As of May 2019, Boeing had delivered 4,979 737-800s, 116 737-800As, and 21 737-800 BBJ2s and has 12 737-800 unfilled orders. The 737-800 is the most common variant of the 737NG and is the most widely used narrowbody aircraft.
A highly detailed 3D printable model of BOEING 737-800 with the designation of doors, windows, air intakes, high-lift devices. Antennas, probes and flap track fairings are made in separate parts. Model with CFM56-7 series engines with long nozzle.
- Model code: 121114 Airplane Model Kit BOEING 737-800
- Scale: 1/100
- Winglets: Split Scimitar
- Landing gear: up
- Fuselage length: 394.7 mm
- Wingspan: 357.9 mm
It is possible to assemble model with rotating fans. The model requires gluing. 3D Printing Guidelines and Assembly Instructions are included.
The model is optimized for a 0.4 mm nozzle and 0.15 mm layers. Approximate filament length for one model (without stand) - 52 meters.
Files format: .stl
Dimensions of the largest parts (in mm):
- Left/Right Wing 10.2 x 103.2 x 160.5
- Fuselage Tail 37.6 x 40.1 x 135.1
- Fuselage Center 38.2 x 41.6 x 123.0
- Fuselage Nose 37.6 x 40.1 x 122.1
- Stand 110.0 x 120.0 x 93.3
All parts were tested on a 3D printer Anycubic i3 Mega-S. The manual includes information about supports and printing recommendations.