Titan Aero Mount both versions for Anycubic i3Mega 3D print model

All files for standard and mirrored version included.

Needed Parts:

Extruder: Titan Aero (Tested with original E3D-Tian Aero and Trianglelab Titan Aero clone)

Hexnuts: 3x M3

Inserts: 4x M3x8x5 7x M3x4x5

Screws: 2x M3 x 6mm 5x M3 x 15mm 4x M3 x 20mm 4x M3 x 25mm 5x M3 x 30mm

Linear Bearing: 2x Igus DryLin® R - RJ4JP 01-08 (or similar)

new (longer) belt

Installation: 1.) anchor_plate:

  • Install Bearing using 1 clip
  • Install belt using belt_stopper (see picture)

2.)mainbody

  • insert Hexnut (3x)
  • assambly inserst (2x M3x8x5, 1x M3x4x5)
  • install Titan aero, using the instruction from the factory

3.) belt_tensioning

  • assambly inserst (2x M3x8x5)
  • Install belt using belt_stopper

4.) Disassamble Rails

  • Open screw from the side
  • slide Rails out
  • mount anchor_plate on top rail
  • mount linear bearing on bottom rail

5.) Slide mainbody over bottom-rail-liner-bearing 6.) secure with 2x clip 7.) slide mainbody over top-rail-linear bearing 8.) take care all wire are in correct place 9.) Screw mainbody and anchor_plate together (4x M3 x 25mm) 10.) Screw belt_tensioning and anchor_plate together (2x M3 x 30mm)

11.) adapter_5015

  • assambly inserst (2x M3x4x5)
  • srew fan 5015 to adapter, airinlet face down clue fanduct_5015 to the fan (see picture for correct orientation)

12.)fanduct_4040

  • assambly inserst (4x M3x4x5)
  • srew fan 40x 40 to adapter

13.) Screw the prefered fan to mainbody (1x M3 x 15)

Connect all wires and install firmware as described in the dokuments, that come with your titan aero.

Have fun :-)

    Item Rating10
    Titan Aero Mount both versions for Anycubic i3Mega
    $29.00
    All prices are exclusive of VAT
    Send your price offer to the author if you want to buy it at lower price.
    Custom License
    Custom License allows uses of the product as specified by designer. Such additional license<br/> terms shall be applied and interpreted as additions and (or) exceptions to the conditions set<br/> by general licensing terms and Royalty Free License.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
    Response - % in - h
    3D Print Modeling
    Hire me
    3D model formats
    • Stereolithography (.stl) (15 files)-
    3D model details
    • Publish date2018-12-05
    • Model ID#1841333
    Help