Detailed neutrona wand from the ghostbusters movie frozen empire.I referenced trailers and footage from the set. I tried to take into account all the little details.

Model dimensions:

• length – 603 mm
• height – 144 mm
• width – 133 mm

The model consists of:

Ver1 - neutrona wand not divided into partsVer2 - neutrona wand into 69 parts for printing

The Neutrona wand is divided so that individual parts can be printed with plastic of the same color as the part.

The part name indicates the color of the part.The Neutrona wand is divided into smaller STL parts for printing on press tables with a print area width of less than 200 mm.

The Neutrona wand is fully ready for simple 3D printing on FDM, SLS and SLA printers.

Separately, taking into account printing on printers with a small print area. But you can split it yourself as you need. The model file is attached in one piece.

When assembling it is necessary to use a 19.4 mm diameter pet pipe. It is used to provide rigidity in the handle and barrel parts.

A model without the use of electrics and electronics. But if you are interested in developing this project let me know. I am always happy to receive new suggestions and ideas!

Formats: .OBJ .STL .SAT .STEP .XB .XT .IGS .SLDPRT

Have a good build and enjoy the model!