Scale: 1/87 (H0) Printing technique: FDM Printer size: small eg. Anycubic i3mega (200x200)Sizes of the matts (center element):Small: 57mm x 185mmMid: 84mm x 185mmBig: 110mm x 185mm

1. Each mat size is completed with two ends allowing you to finish the pattern evenly.
2. You can also multiply the mat elements to create any length.
3. You can scale the model 0.75 percent, but no more, because the printer nozzle is 0.4 mm in diameter, scaling more than 0.75 percent is unlikely to work. Remember to scale the X and Y dimensions while leaving the Z wipe unchanged.Note1: the mat should be painted with gray oxide primer or printed with marble filament (if you are going to use marble filament to print the model, remember to make sure the filament is matte!)Note2: the paving mat can be easily bent and cut with scissors or a scalpel