Harley Twin Cam gear locking tool Replace HD-47941 and Acc 3D print model
Fit Dyna 2006 + and all Twin Cam 2007 + Replace HD-47941 Designed to lock the Cam & Pinion gears to properly remove, install and torque the holding bolts *Now include a valve storage box so you don't mix your parts when you take apparts the heads !
As most of us will only do cam swap or engine rebuild once or twice in our life time I made that small handy tool available to save you money. Why buying a tool for 30$ + if you will only use it once. Made in Canada, By a biker for bikers. I was doing a cam swap in my 103 and decided to save some buck by 3D printing this tool.
*Now with the cam holder and the crank socket. Use with moderation, there is no reason to put tension on this crank socket, it is just really helpfull to reposition with a 3/8 ratchet.
*for the cam alignement tool set height (Z) at 23.7 mm, with a fix ratio you should have the proper size at the first try. might depend on the printer. *Use thick wall and maximum fill to get a proper strenght *Personnal use only, not strong enought to endure a shop use
Do not hesitate to contact us anytime before and after your purchase, we are committed to your 100% customer satisfaction. I am here and ready to assist you with any questions or concerns you might have before or after the purchase. My goal is to make sure you are a happy customer and pleasant shopping with us.
If you are satisfied with the purchase and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5. Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left. If you plan to give us a neutral/negative feedback Or open ebay/paypal case, please write to us immediately so that we can do our best to resolve your problem.