A headlight cover to suit a Yamaha Super Tenere XT1200Z.For use if you have a larger than normal light globe, such as a LED H7 with a heat sink on the back.

You will need to remove the rubber o-ring from the stock cover and fit it to the printed model, or use soft, dia4mm rubber oring.

Pleasy print and test dimensions of printout, the most urgent dimension is a dia 72.9mm, it should be in the tollerance (dia 72.8 will be perfect).Material: ASA, ABS, PTEG.Supports:Yes

Resolution:0.2mm

Infill:50%