These are original and super detailed 1/10 scale hinges. There are 3 variants currently available.

Included are 3 different lengths and designs of non-functioning, but highly detailed hinges to be used on your crawler rig to make it look more scale. It is surprising how just the addition of 3D detailed hinges doors and the bonnet make such a huge improvement in terms of looks.

As these hinges are so small, it is recommended ONLY for resin printers, printed at less than 0.04mm layer heights. Layer lines might become visible at 0.04mm or higher.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary.

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.