3D model descriptionBring some Christmas fun to your collection with this unique Retractable Sword Snowman! This model features a print-in-place, retractable sword mechanism, allowing you to print it in a single go without assembly. Available in both STL and OBJ file formats, it offers five versions for different printing needs, resulting in ten files in total.

Versions Included:

-Ready Print - Print-in-place version for easy, one-piece printing.-Semi-Burst - Designed for smaller print volumes, only a portion of the model to minimize size.-Sword Burst - Model with the sword extended.-Sword Only - Just the sword part, for those who want a standalone piece.-Full Burst - Complete model with all parts separated, for anyone who prefers more control over the printing process.

Dimensions:

-Full sword (retracted): 7.9cm x 10.1cm x 25.0cm-Full sword (extended): 7.9cm x 10.1cm x 55.6cm-Semi-Burst: 7.9cm x 10.1cm x 19.0cm

Refer to the image above for visuals of each version.

The Ready Print model is intended for those who want a single, integrated print, while the Semi-Burst model is ideal for printers with smaller build volumes. The Full Burst version offers all parts separated for additional flexibility if you're cautious about print-in-place reliability.

Happy printing, and enjoy your festive Retractable Sword Snowman!

3D printing settingsPrint in Place setting:

Layer Height: 0.2mm (0.1mm for finer detail).Infill: 10-15% (100% for the drain cover if stability is needed).Walls: 3-4 walls for strength.Supports: NeededBrim: Recommended for bed adhesion.Print Speed: 40-50mm/s; 30mm/s for first layers.Retraction: 1-2mm distance, 20-25mm/s speed.Cooling: Fan at 100% after first layers.Material: PLA recommended; PETG or ABS optional.Bed Temperature: PLA at 50-60°C; adjust for other materials.Ensure your printer is calibrated for tolerance to avoid fused parts.

Semi-Burst Model

Layer Height: 0.2mm (0.1mm for finer detail).Infill: 10-15%.Walls: 3-4 walls.Supports: Required.Brim: Recommended for better adhesion.Print Speed: 40-50mm/s.Material: PLA; PETG or ABS optional.Bed Temp: PLA at 50-60°C.

Sword Burst Model

Layer Height: 0.2mm.Infill: 10-15%.Walls: 3 walls.Supports: Required.Brim: Optional but helps with stability.Print Speed: 40mm/s.Material: PLA recommended.Bed Temp: PLA at 50-60°C.

Sword Only Model

Layer Height: 0.1-0.2mm.Infill: 15%.Walls: 3 walls.Supports: Required.Brim: Optional.Print Speed: 40mm/s.Material: PLA, PETG.Bed Temp: PLA at 50-60°C.

Full Burst Model

Layer Height: 0.2mm.Infill: 10-15%.Walls: 4 walls.Supports: Required.Brim: Recommended for bed adhesion.Print Speed: 40-50mm/s.Material: PLA preferred; PETG/ABS optional.Bed Temp: PLA at 50-60°C.