Medical Tool box for Transformers Ratchet 3D print model

Being locked in this centuries old conflict means that getting injured is always par for the course for our robotic pals. Again to the rescue comes Ratchet now armed with his new medical tool box!

Let's firstly hook up a welding torch to the pack to get things stuck back on right. Effect parts can be attached to the front 3mm tip and a 5mm port on the back allows for more parts or tubing to be used.

Looking closer at the box - the handle closes and tabs together at the middle bit. This allows for the box to be carried by Ratchet, or any other bot for that matter! With the lid open, the four tools provided by can either be neatly arrayed on the provided insert, or simply chucked in there willy nilly.

=== ASSEMBLY ===

Just a couple of things to take note for this build:

• Getting the two lids attached to the main body of the case requires either the use of some short lengths of 1.75mm filament or more optimally some brass rods or similar.

• Some slight sanding may be required for the tab and hole in the ends of the lid handles to get things to fix snugly without being too tight.

===

Enjoy outfitting the Doc with this addon set - happy 3d printing as always ! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog