CyberBase System Transformers Fort Maximus Backwall and Pedestal 3D print model

To complete the Fortress Maximus Main Terminal from earlier ( https://www.patreon.com/posts/59705938 ), here's the backwall and a pedestal to allow the entire piece to be displayed impressively upon a 3 x 3 CyberBase Tile setup.

The pedestal is set up below to help prop up Cerebos' chair to be around the same height to use the console's keyboard.

And in his head mode, mounted upon the terminal itself - this is how it looks with the simple representation of the matrix framing him from behind.

=== ASSEMBLY ===

The attached diagram shows the list of parts required for this build.

Couple of things to note:

• The 3 pieces of the back wall and the 3 pieces of the base piece can be glued together with the use of optional 5mm peg pieces.

• The matrix Motif piece can be printed as two halves or a full piece - both options are provided. The middle sphere piece is provided separately to make it easier to either print or paint in a different color.

+The CyberBase floor tiles and pillars are available here - patreon.com/posts/33140482

• The Autobot crew seat shown is available here - patreon.com/posts/56931537

===

Happy 3d printing this massive Headmasters showcase piece for your display shelves! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog