Puzzle without any specific shape, own creation. I really like puzzles, that's why I designed this 100 pieces puzzle to see how it would look like, I liked the result quite a lot...

In the .zip file come the 100 pieces of the puzzle, the pieces already bring internally a tolerance of 0.3 mm between them, you can print the pieces 1,2,11 and 12 to see how would be 4 pieces together with that tolerance and go adjusting (I used an extra horizontal size compensation of 0.1 mm in simplify 3D because I had been a little loose).

In one of the pictures you can see the completely assembled puzzle and some numbers above the pieces, those numbers represent the name of how that piece is stored, in case you want to do a test with the first ones, for example.

I recommend a 15% fill, about 40 mm/s speed (if you like it can be less), for solid background layers I used 0 (but if you like you can leave them as you have them), these are my recommendations and my printing parameters, you can use yours as you like.

Knowing which is the numbering of the pieces you can print them in one color or another to suit your convenience, if you make any special shape send me a picture, I would like to see them.

I also made two designs of bases to print and put the puzzle inside (it has a tolerance of 0.3 mm with respect to the puzzle, to take it into account).

It's a lot of fun to assemble it, there is no age to assemble a puzzle... if you have any doubt send me a message, thanks and enjoy !

Layer - 0.2 mmSpeed - 40 mm/sNo supportsInfill - 15%Temperature 205 degrees and 70 degrees bed