Sony Playstation Vita 1000 OLED Triggers 3D print model

I made this more for streaming my games with moonlight. I hate the back touch screen so...my solution. You will want soldering skills to do the wiring, i'm sure you do it without soldering, won't be as durable though.

You will need 4 springs, i got mine from BIC lighters, under the flint scraper.You will also need wire, if you can get aluminum and cut 4 stripes that would be better. *Wire does work but i wanted reliability and i found the wire very finigity.You'll need a bit of Aluminum Tinfoil and a glue. I used glue what was for water sealing phones screens after replacement. It's more rubbery.You'll need to glue the tin foil over both handles. You can also jerry rig something up your self to get the right and left handles grounded to you. You compleate the circuit see.Always have Duck Tape at the ready.The rest is straight forward, Ill upload a bunch of photos to show you what i did.

*One side note, when you insert the bottom button, be sure to put it's clip in after, you won't have access to it once you put the top button in.**I printed everything but the base at 0.12. I printed the base at 0.24 using ABS, but any other material should work fine.