WRIST GRABBER 3D print model

A system to be able to operate a wrist without touching it.

This mechanism is actuated by the pressure on the central part and carries out the clamping.

This clamp is designed for a 19 mm diameter wrist.

No support required.

More projects :

https://www.cgtrader.com/fabricejeanpier

3D PRINTING SETTINGS unsupported

Extruder: 200°C and bed: 55 ° C

Layer height: 0.2 mm

Vertical hulls, perimeter: 3

Horizontal hulls, solid roof: 3 and below: 3

Filling density: 20%.

Speed perimeter: 30 mm / s