Crew Dragon Keyring - SpaceX Dragon 3D print model

So, how do you think the astronauts onboard Dragon Crew keep their keys? They use keyrings, obviously!

Now you can have your own keyring inspired on that fancy capsule with first-class seats and great onboard entertainment system!

The model is separated in two parts so they can be printed in their respective colours (white and black/graphite/silver). The top portion of the capsule has a channel where you can attach a small chain, cord or keyring.

The tolerances are well within 0.2 to 0.5 mm so just minor sanding and filling will be required for the assembly if you have a tuned printer.

It is recommended to test a “dry fit” prior any permanent gluing.

The glue recommended varies based on the type of filament. As a starting point, conventional CA glue can be used as well as model kits glues, the later one allowing a bit more of time to align and adjust the parts.

The recommender 3D printing settings for layer heights and support are suggested in the instruction for each file. Infill ranging from 15% to 20% suits most of the parts.

If you have any feedback, questions, suggestions or just want to share the results of your print feel free to contact me.


Printing Settings Layer heights and support are suggested in the instruction for each file. Infill ranging from 15% to 20% suits most of the parts. Certain parts must be printed with 100% infill to assure proper strength. Detailed instructions are provided in the PDF.

This model is for your personal and non-commercial use only. Therefore, according to the defined license for this design, the selling or redistribution/sharing of either the files or printed copies of this model are not permitted.

DISCLAIMER For the convenience of the user, all the files (STLs and PDF) are packed in one single RAR file. These files are generally compatible and can be extracted in the commonly used operational systems. However, if you find any trouble unpacking the files, free software such as Winrar, Winzip, 7zip are suggested for this task. If you find any issue such as getting a corrupted file it is recommended to download the file once again. The model will be available in your profile in the Purchase section. If after this you are still finding any problems unpacking the files feel free to contact me via a direct message

This product has no reviews yet
Crew Dragon Keyring - SpaceX Dragon
All prices are exclusive of VAT
Custom License
Custom License allows uses of the product as specified by designer. Such additional license<br/> terms shall be applied and interpreted as additions and (or) exceptions to the conditions set<br/> by general licensing terms and Royalty Free License.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
Response 50% in 24.2h
3D Modeling
3D Print Modeling
3D model formats
  • Stereolithography (.stl)2.29 MB
  • PDF (.pdf)2.29 MB
3D model details
  • Publish date2020-08-05
  • Model ID#2546436