This model is a compact corner bracket designed in SolidWorks and intended for 3D printing. It serves as a mechanical mounting support or linkage, ideal for lightweight structural applications, such as electronics enclosures, brackets for robotics, or small mechanical assemblies.

Technical SpecificationsModel Type: L-bracket style mounting support

Design Software: SolidWorks

Application: Structural support, fixture mounting, small enclosures

Dimensions & FeaturesOverall Length (Base): 13.00 mm

Width of the Base: 8.00 mm

Height: 13.00 mm

Vertical Thickness: 3.00 mm

Base Thickness: 7.00 mm

Large Hole Diameter (Top): Ø4.00 mm

Small Hole Diameter (Base): Ø4.00 mm

Distance between hole centers: ~13.01 mm

Radius of Fillet (R): 6.52 mm (smooth transition between vertical and horizontal faces)

Edge Chamfers: Present on countersinks to accommodate screw heads flush to surface

Measured Area: ~61.18 mm²

Perimeter of vertical face: ~36.86 mm

Design FeaturesTwo aligned Ø4 mm holes: suitable for M4 screws or bolts

Vertical hole allows mounting to an upright surface

Horizontal hole can be fixed to a base or panel

Generous fillet radius (6.52 mm) ensures stress relief and strength at the internal corner

Countersinks on both holes allow flat screw seating

Compact form factor makes it ideal for space-constrained installations

3D Printing RecommendationsMaterial: PLA (prototyping), PETG (durable), or ABS (mechanical applications)

Infill: 40–70%

Supports: May be required under overhangs, depending on print orientation

Layer Height: 0.2 mm

Orientation Tip: Lay bracket flat on the base with the vertical hole facing upward to avoid support material in the hole

Possible ApplicationsMiniature mechanical assemblies

Enclosure mounting brackets

Custom electronic device fixtures

Lightweight robotics or sensor support