3D-Wireframe Model of a horse head and legs. Ideal decoration or present for horse-loving-people. I designed it for my girlfriend since it fits perfectly into a minimalist living- or bedroom.There's two versions of the head available, one with the eyes and one without. The size of the head is about 1000mm, the left leg about the same and the angled leg extrudes around 600mm. The thickness of the lines is 16mm, it can be easily scaled up or down and I found that a scale of around 15-20% is still stable enough.

Resin-printing would be ideal, but it can be easily be printed with FDM-printers as well, you just need the right slicer settings, especially supports and wall-thickness are key.

NOTE: The printed head in the images is a previous prototype, the geometry failed in the lower part so it had to be changed.