Pharah - Overwatch 3D print model

When you download you will have 9 Stl Files ( 2 GB )

Full Parts

1.Pharah Figure 2.Base 3.Full Body With Base

Disassembled Parts

1.Pharah Torso - Hip - Right Arm Disassembled 2.Pharah Base Disassembled 3.Pharah Head Disassembled 4.Pharah Right Leg Disassembled 5.Pharah Left Arm Disassembled 6.Pharah Left Leg Disassembled 6.Hands With Gun Disassmebled

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Print Settings

Print Temperature : : 205 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2